supplied with this appliance, it should be cut off and an

THE WIRES IN MAINS LEAD ARE COLOURED IN

 

English

For U.K. customers

Special Instructions for U.K. Model

 

 

If the socket outlets in the home are not suitable for the plug

IMPORTANT

 

 

appropriate 3 pin plug fitted. For details, refer to the

ACCORDANCE WITH THE FOLLOWING CODE:

 

 

 

instructions described on the right.

 

 

 

 

Blue: NEUTRAL

 

 

Note: The plug severed from the mains lead must be

Brown: LIVE

 

 

destroyed, as a plug with bared flexible cord is hazardous if

 

 

 

engaged in a live socket outlet.

As the colours of the wires in the mains lead of this

 

 

 

apparatus may not correspond with the coloured markings

 

 

 

identifying the terminals in your plug, proceed as follows:

 

 

 

The wire which is coloured BLUE must be connected to the

 

 

 

terminal which is marked with the letter N or coloured

 

 

 

BLACK. The wire which is coloured BROWN must be

 

 

 

connected to the terminal which is marked with the letter L

 

 

 

or coloured RED. Making sure that neither core is

 

 

 

connected to the earth terminal of the three pin plug.

 

 

 

 

 

 

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

Battery installation

 

 

 

 

Remote control transmitter operation range

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

1

3

Remote control sensor

Within approximately 6 m (19.7 feet)

30

 

°

°

30

 

 

Battery replacement

When you notice a decrease in the operating range of the remote control transmitter, the batteries are weak. Replace both batteries with new ones.

Notes

Use only AA, R6, UM-3 batteries for replacement.

Be sure the polarities are correct. (See the illustration inside the battery compartment.)

Remove the batteries if the remote control transmitter will not be used for an extended period of time.

If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

Notes

There should be no large obstacles between the remote control transmitter and the main unit.

If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp, etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting.

5