Yamaha RX-V463 71 En, Parameter initialization DPARAM. INI, Bluetooth setting EBLUETOOTH SET

■Audio select C)AUDIO SELECT

Use this feature to designate the default audio input jack select setting for the input sources when you turn on the power of this unit.

Choices: AUTO, LAST

3 OPTION MENU

C)AUDIO SELECT >AUTO LAST

[p]/[[]:Select

•Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate input mode.

•Select “LAST” if you want this unit to automatically select the last input mode used for the connected input source (see page 34).

■Parameter initialization D)PARAM. INI

Use this feature to set all the parameters of the sound field programs to the initial factory settings.

Choices: NO, YES

3 OPTION MENU

D)PARAM. INI

>NO YES

[p]/[[]:Select [ENTER]:Return

•Select “NO” to cancel the parameter initialization and return to the previous menu screen.

•Select “YES” and press 8ENTER to set all the sound field parameters to the initial factory settings.

Notes

•You cannot automatically revert to the previous parameter settings once you initialize the sound field program parameters.

•You cannot separately initialize individual sound field programs.

•You cannot initialize any sound field program groups when “MEMORY GUARD” is set to “ON”.

SET MENU

■Bluetooth setting E)BLUETOOTH SET

3 OPTION MENU

E)BLUETOOTH SET

START PAIRING

[ENTER]:Enter

Use this feature to start pairing the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with your Bluetooth component. For details about the pairing, refer to “Pairing the Bluetooth™ adapter and your Bluetooth component” on page 59.

To ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting.

1Press 8ENTER to start pairing.

The connected Bluetooth adapter starts searching Bluetooth components. “Searching...” appears in the video monitor.

2Check that the Bluetooth component detects the Bluetooth adapter.

If the Bluetooth component the Bluetooth adapter, “YBA-10 YAMAHA” (example) appears in the Bluetooth device list.

3Select the Bluetooth adapter in the Bluetooth device list and then enter the pass key “0000” on the Bluetooth component.

Once this unit completes the pairing successfully, “Pairing completed” appears.

y

To cancel the pairing, press 9RETURN to exit from “START PAIRING”.

4Press 9RETURN to exit from “START PAIRING”.

Notes

•If the connected Bluetooth adapter cannot find any Bluetooth components, “Not found” appears.

•If a Bluetooth adapter is not connected to this unit, “No Bluetooth Adapter” appears.

OPERATION ADVANCED

English

71 En