PREPARATION
SPEAKER SETUP
Speakers
This unit has been designed to provide the best sound- field quality with a
The main speakers are used for the main source sound plus effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for effect and surround sounds. The center speaker is for the center sounds (dialog, vocals, etc.).
The main speakers should be
It is also possible to further expand your system with the addition of a subwoofer. The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE
Speaker placement
Refer to the following diagram when you place the speakers.
Center speaker | Main speaker (R) |
| Rear speaker (R) |
| Subwoofer |
Main | 1.8 m (6 feet) |
speaker (L) |
Rear speaker (L)
■Main speakersPlace the main left and right speakers an equal distance from the ideal listening position. The distance between each speaker and each side of the video monitor should also be the same.
■Center speakerAlign the front face of the center speaker with the front face of your video monitor. Place the speaker as close to the monitor as possible (such as directly over or under the monitor) and centrally between the main speakers.
■Rear speakersPlace these speakers behind your listening position, facing slightly inwards, nearly 1.8 m (6 feet) above the floor.
■SubwooferThe position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the main speakers. Turn it slightly toward the center of the room to reduce wall reflections.
Note
PREPARATION
•If you do not use any of effect speakers (rear and/or center), change the settings of SPEAKER SET items at the SET MENU to designate the signals to other terminals you connect speakers to.
CAUTION
Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away from the monitor.
English
9