ADJUSTING SPEAKER OUTPUT LEVELS

4 Adjust the level of the

 

PRESET/CH

 

effect speakers using j / i

 

 

 

so that it matches the

–

SELECT

+

 

level of the main

 

 

 

speakers.

 

 

 

While adjusting, the test tone is heard from the selected speaker.

Note

•To adjust the level of the main speakers, use VOLUME knob (or VOLUME +/– on the remote control).

5 When adjustment is complete, press TEST to stop the test tone.

TEST

RETURN

Notes

•If “1A CENTER” on the SET MENU is set to NON and the center speaker is not connected, the center channel sound is automatically output from the main left and right speakers.

•If “1C REAR LR” on the SET MENU is set to NON, the output level of the rear left and right speakers cannot be adjusted in step 4. The test tone will be circulated skipping the rear right and left speakers.

•If “1D BASS” on the SET MENU is set to MAIN, the test tone will be circulated skipping the subwoofer.

y

•It is not necessary to readjust the speaker levels once they are set (as long as you do not change the speakers). You can enjoy listening to or watching the input source at the desired volume simply by adjusting the VOLUME knob (or VOLUME +/– on the remote control).

•If the output level of the effect speakers (center, rear left, and rear right) cannot be increased enough to match the level of the main speakers, set “1E MAIN Lv” on SET MENU to –10 dB (see page 44). This setting decreases the main speaker output level to about one-third of the normal level. After you have set “1E MAIN Lv” on the SET MENU to –10 dB, adjust the levels for the center and rear speakers again.

22