PTY SEEK function

If you select the desired program type, this unit automatically searches all preset RDS stations that are broadcasting a program of the required type.

1 Press PTY SEEK MODE to set this unit in the

PTY SEEK mode.

The program type of the station being received or “NEWS” flashes on the front panel display.

PTY SEEK

MODESTART

Flashes

2 Press PRESET/TUNING l / h to select the desired program type.

The selected program type appears on the front panel display.

PRESET/TUNING

3 Press PTY SEEK START to begin searching all preset RDS stations.

The selected program type flashes and the “PTY HOLD” indicator lights up on the front panel display while searching for stations.

PTY SEEK

MODESTART

PTY HOLD

Lights up

•If a station that is broadcasting a program of the required type is found, this unit stops at that station.

•If the called station is not the desired one, press PTY SEEK START again. This unit begins searching for another station that is broadcasting a program of the same type.

■To cancel this function

Press PTY SEEK MODE twice.

RECEIVING RDS STATIONS

EON function

This function uses the EON data service on the RDS station network. If you simply select the desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches for all preset RDS stations that are scheduled to broadcast a program of the required type and switches from the station being currently received to the new station when the broadcasts starts.

Note

•This function can only be used when an RDS station that offers the EON data service is being received. When such a station is being received, the “EON” indicator lights up on the front panel display.

1 Make sure that the “EON” indicator lights up on the front panel display.

If the “EON” indicator does not light up, tune in to another RDS station so that the “EON” indicator lights up.

2 Press EON repeatedly to select the desired program type (NEWS, INFO, AFFAIRS or SPORT).

The selected program type name appears on the front panel display.

RDS MODE/FREQ

E O N

•If a preset RDS station of the selected program type starts broadcasting, this unit will automatically switch from the program being currently received to that program. (EON indicator flashes.)

•When broadcasting of the required program ends, the previously received station (or another program on the same station) is recalled.

■To cancel this function

Press EON repeatedly until no program type name lights up on the front panel display.

OPERATION

BASIC

 

 

English

39