BASIC OPERATIONS

TO PLAY A SOURCE

2

3

1, 6

 

 

l6

 

20

l2

 

28

8

 

40

4

 

60

2

 

 

0

 

 

–dB

English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

: Provided for RX-V692RDS

 

 

 

 

 

 

 

 

 

 

 

4

 

 

7

 

 

only.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

VOLUME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

l6

 

 

 

 

 

 

 

 

 

 

 

20

l2

 

 

 

 

28

8

 

 

 

 

 

 

 

 

40

4

 

 

 

 

 

 

 

602

0

–dB

Set to the “∞ ” position.

2 Turn the power on.

POWER

3 Select the desired input source by using the input selector buttons.

(For video sources, turn the TV/monitor ON.)

VCRTV/DBS DVD/LD

VIDEO AUX TAPE (MD) MON

*The name of the selected input source will appear on the display.

4 Select the main speakers to be used.

SPEAKERS

A B

ON

*If you use two main speaker systems, press both the A and B switches.

5 Play the source. (For detailed information on the tuning operation, refer to page 28.)

6

l6

 

VOLUME

20

l2

28

8

40

4

602

0

–dB

Adjust to the desired output level.

7 If desired, adjust the BASS, TREBLE, BALANCE controls, etc. (refer to page 27) and use the digital sound field processor. (Refer to page 39.)

Notes on using the input selector buttons

●Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel.

*To select the source connected to the VIDEO AUX terminals on the front panel, press VIDEO AUX.

●The selection of TAPE (MD) MON cannot be canceled by pressing another input selector button. To cancel it, press TAPE (MD) MON again so that “TAPE MONITOR” disappears from the display.

When you select a button other than TAPE (MD) MON, make sure that “TAPE MONITOR” is not illuminated on the display.

●If you select the input selector button for a video source without canceling the selection of TAPE (MD) MON, the playback result will be the video image from the video source and the sound from the audio tape (or MD etc.).

●Once you play a video source, its video image will not be interrupted even if the input selector button for an audio source is selected.

To turn off the power

Press the POWER switch again.

25