NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

Battery installation

Remote control transmitter operation range

RX-V692RDS

English

2

1

3

RX-V592RDS

2

1

3

Battery replacement

If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones.

Notes

Use only AA, R6, UM-3 batteries for replacement.

Be sure the polarities are correct. (See the illustration inside the battery compartment.)

Remove the batteries if the remote control transmitter will not be used for an extended period of time.

If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

RX-V692RDS only

After you change batteries, make sure to press the RESET button inside the battery compartment.

Remote control sensor

Within approximately 6 m (19.7 feet)

30°

30°

 

Notes

There should be no large obstacles between the remote control transmitter and the main unit.

If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct

lighting.

5