Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RX-V690 To play a source with the digital sound field processor

1 36

Download 36 pages, 522.84 Kb

To play a source with the digital sound field processor

2

3

3 2

	CHAPTER/CH		DISPLAY	STOP	VCR 1
	PRO LOGIC	ENHANCED	70mm	TV	VCR 2
	PRO LOGIC	ENHANCED	MOVIE THEATER	THEATER	VCR 2
	1	2	3	4
		SURROUND
	SPORTS	STADIUM	ROCK	JAZZ CLUB	V–AUX
	5	6	7	8
	CHURCH	HALL	DSP	EFFECT	MASTER
	9	10	DSP	ON/OFF	MASTER
	9	10		ON/OFF	VOLUME
	CENTER LEVEL			TEST
			DELAY
			TIME
	REAR LEVEL			MUTING
	RESET	CLEAR

1 Follow steps 1 – 6 shown in “BASIC OPERATIONS” on page 16.

2 Select the desired program that is suitable for the source.

DIGITAL SOUND FIELD PROCESSOR

	70mm	TV	SPORTS STADIUM
PRO LOGIC ENHANCED MOVIE THEATER THEATER
JAZZ	CHURCH	CONCERT	EFFECT
		HALL

WIDE

PRO LOGIC

The selected program name is shown on the display.

3 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on page 26 and 27.)

Notes

●If you prefer to cancel the DSP, press the EFFECT switch. The sound will be the normal 2-channel stereo without surround sound effect.

●When STADIUM, ROCK CONCERT, JAZZ CLUB, CHURCH or CONCERT HALL is selected, no sound is heard from the center speaker.

●When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center channel mode is in PHANTOM, the front speakers output the sound of the center channel.

●When this unit’s Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect.

25

Contents

OWNER’S MANUAL CONTENTS SAFETY INSTRUCTIONS Note to CATV system installer: Caution: Read this before operating your unit We Want You Listening For A Lifetime ●5 Speaker Configuration Front: (U.S.A. and Canada models) 80W + 80W (8Ω ) RMS Output Power, 0.04% THD, 20–20,000Hz (Australia, Singapore and General models) 75W + 75W (8Ω ) RMS Output PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Pro Logic Surround + DSP SPEAKER SETUP SPEAKERS TO BE USED SPEAKER CONFIGURATION SPEAKER PLACEMENT CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS CONNECTING TO S VIDEO TERMINALS CONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL) CONNECTING SPEAKERS How to Connect: ABOUT THE ACCESSORY TERMINALS AC OUTLET(S) (SWITCHED) GND terminal (For turntable use) LOW PASS terminal FRONT OUTPUT terminals ANTENNA CONNECTIONS SPEAKER BALANCE ADJUSTMENT CONTINUED Page Page BASIC OPERATIONS TO PLAY A SOURCE TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE) Selecting the SPEAKER system Adjusting the BALANCE control Adjusting the BASS and TREBLE controls Using the TONE BYPASS switch When you listen with headphones TUNING OPERATIONS AUTOMATIC TUNING MANUAL TUNING PRESET TUNING MANUAL PRESET TUNING AUTOMATIC PRESET TUNING To store stations EXCHANGING PRESET STATIONS USING DIGITAL SOUND FIELD PROCESSOR (DSP) Front Panel Remote Control Transmitter Description of Each Sound Field Program To play a source with the digital sound field processor Adjustment of the CENTER LEVEL Adjustment of the REAR LEVEL Adjustment of DELAY TIME SETTING THE SLEEP TIMER To set the SLEEP time To cancel the selected SLEEP time REMOTE CONTROL TRANSMITTER NOTES ABOUT THE REMOTE CONTROL TRANSMITTER KEY FUNCTIONS For Other Component Control For Control of This Unit REMOTE CONTROL “LEARNING” FUNCTION To Learn a New Function To Clear a Learned Function To Clear All Learned Functions Trouble shooting guide TROUBLESHOOTING SPECIFICATIONS AUDIO SECTION VIDEO SECTION FM SECTION AM SECTION