* The following adjustments can be done on the remote control transmitter as well as on the front panel.

Adjustment of the CENTER LEVEL

If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 15.

To operate on the front panel

1

CENTER

2

LEVEL

Adjustable

By continuously pressing “+” or “–”, the level value changes continuously. However, the value stops changing momentarily at the preset point (80).

●If the digital sound field program STADIUM, ROCK CONCERT, JAZZ CLUB, CHURCH or CONCERT HALL is selected, this adjustment cannot be made.

●Once the output level is adjusted, the level value will be the same in all the programs except mentioned above.

●If a digital sound field program is not used, this adjustment cannot be made.

Press “+” or “–” before “CENTER” disappears from the display.

To operate on the remote control transmitter

Simply press the CENTER LEVEL “+” or “–” key.

Adjustment of the REAR LEVEL

If desired, you can adjust the sound output level of the rear speakers even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 15.

To operate on the front panel

By continuously pressing “+” or “–”, the level value changes continuously. However, the value stops changing momentarily at the preset point (80).

●Once the output level is adjusted, the level value will be the same in all the digital sound field programs.

1

2

REAR

LEVEL

●If DOLBY PRO LOGIC or a digital sound field program is not used, this adjustment cannot be made.

Adjustable

Press “+” or “–” before “REAR” disappears from the display.

To operate on the remote control transmitter

Simply press the REAR LEVEL “+” or “–” key.

26