CONNECTING SPEAKERS

Connect the respective speakers to this unit as figured below.

Rear speakers

 

Right

Left

 

8ΩMIN.

 

OUTPUT

/SPEAKER

FRONT

CENTER REAR

REAR

 

 

CENTER

 

 

C

D

 

 

DUAL

LOW

C D:4ΩMIN./SPEAKER

SINGLE

PASS

fc:200Hz

SINGLE:8ΩMIN./SPEAKER SPEAKERS

 

 

SPEAKERS

 

A

A

 

B

B

 

Center speaker

 

 

 

FRONT

 

RightLeft

RightLeft

Front speakers A

Front speakers B

Note on front speaker connection:

One or two speaker systems can be connected to this unit. If you connect only one speaker system, connect it to either the SPEAKERS A or B terminals.

IMPEDANCE SELECTOR switch (Canada model only)

Be sure to switch this only when the power of this unit is turned off. Select the position proper for the use of your front speakers.

Note on center speaker connection:

One or two center speakers can be connected to this unit. If you cannot place the center speaker on or under the TV, it is recommended to use two center speakers and place them on both sides of the TV to orient the center sound at the center position.

For connecting two center speakers, follow the method shown below.

REAR

CENTER

CD

DUAL

A OR B:USE 4ΩMIN.

/SPEAKER A B:USE 8ΩMIN.

/SPEAKER

A OR B:USE 8ΩMIN.

/SPEAKER

IMPEDANCE

SELECTOR

SELECTEUR

D’IMPEDANCE

When using one pair of front speakers;

•If the impedance of each speaker is

8Ω or higher, set to right ( ).

•If the impedance of each speaker is 4Ω or higher, but lower

than 8Ω , set to left ( ).

When using two pairs of front speakers;

The impedance of each speaker must

be 8Ω or higher.

 

Set this switch to left (

).

SINGLE

Center speaker

Center speaker

FRONT LEVEL switch

(Australia and Singapore models only)

Normally set to “0 dB”. If desired, you can decrease the output level at the FRONT SPEAKERS terminals by 10 dB by setting this switch to “–10 dB”. (Refer toNotes“ ” on page 15.)

l

l0 dB 0 dB

 

FRONT

 

LEVEL

9