PREPARATION
On screen display
If you connect your VCR, LD player, video monitor, etc. to this unit, you can take advantage of this unit’s capability to display program titles, parameter data and information for various setting changes and adjustments on your video monitor screen. This information will be superimposed over the video image.
If there is no video source connected or it is turned off, the information will be displayed over a blue colored background.
You can change the type of display showing various information on the monitor screen by pressing the ON SCREEN display key on the remote controller.
Press this key to change the screen to a full or simple display, or no display at all.
INDEX
DISP
ON SCREEN
Note: The program titles, parameter data and other information are also displayed on the display panel of this unit.
(Example)
Full display
Simple display
Goes off after being displayed for several seconds.
Notes
●When making a setting change or adjustment in the SET MENU mode, or adjusting the speaker balance by using the test tone, information is fully displayed on the monitor screen even if another type of display is currently selected.
●Information displayed on the monitor screen in this way cannot be recorded by a VCR.
26