BASIC OPERATION

mTo enjoy a video source encoded with Dolby Surround, Dolby Digital or DTS

When you select the program No. 1, 2 or 3, and the input signal of the source is 2-channel stereo, Dolby Surround is decoded. When some program is selected and the input signal of the source is encoded with Dolby Digital, Dolby Digital is automatically decoded.

When some program is selected and the input signal of the source is encoded with DTS, DTS is automatically decoded.

The following indicators on the display panel show you what sound processing is being made.

1 2

3 DIGITAL

4 PRO LOGIC

5DSP

DIGITAL SOURCE

AC 3 DTS PCM

1Lights up when a DVD source encoded with DTS is played back and DTS is decoded.

2Lights up when an LD source or a CD source encoded with DTS is played back and DTS is decoded.

3Lights up when Dolby Digital is being decoded and the signals of selected source encoded with Dolby Digital is not in 2-channels.

4Lights up when Dolby Surround is being decoded.

5Lights up when Digital Sound Field Processor is turned on.

The display panel or the monitor screen will show the selected subprogram according to the type of the decoding.

Notes

●Dolby Digital will not be decoded if the source that is not encoded with Dolby Digital.

DTS will not be decoded if the source that is not encoded with DTS.

●If the input signals of source encoded with Dolby Digital are in 2-channels only, the sound processing for them is similar to that for analog or PCM audio signals.

Note

If you change the LD (or CD) being played back with DTS decoded to another disc not encoded with DTS when the red “dts” indicator is illuminated, playing back the newly selected disc will output no sound. In this state, the red “dts” indicator flashes to show that this unit is locked in the DTS-decoding mode.

To play back the disc normally, change the current DTS- decoding mode to another mode by pressing an input selector key on the remote controller or the INPUT MODE button on the front panel so that the red “dts” indicator turns off.

mTo cancel the effect sound

The EFFECT button on the front panel or the EFCT ON/OFF key on the remote controller make it simple to compare the normal stereo sound with the fully processed effect sound.

To cancel the effect sound and monitor only the main sound, press the EFCT ON/OFF key or the EFFECT button. Press the EFCT ON/OFF key or the EFFECT button a second time to restore the effect sound.

Front panel

Remote control

EFFECT

EFCT

orON/OFF

Notes

●If the effect sound is canceled when signals encoded with Dolby Digital or DTS are input to this unit, signals of all channels are mixed and are output from the main speakers.

●If the EFFECT button or the EFCT ON/OFF key is pressed to turn effect sounds off when Dolby Digital or DTS is decoded, it may happen that sound is output faintly or not output normally depending on a source. In that case, press the EFFECT button or the EFCT ON/OFF key to turn effect sounds ON, or use input signals not encoded with Dolby Digital or DTS.

50