Yamaha RXV3000RDS Resetting to the Factory Preset Value, CT. DELAY (Center Delay), FL. DELAY (Front Left Delay), RC. DELAY (Rear Center Delay), FR. DELAY (Front Right Delay)

			DSP Parameter
REV. LEVEL (Reverberation Level)			Control Range 0 – 100 %
Function ..............	This parameter adjusts the volume of the reverberation sound.
Description .........	The larger the value, the stronger the reverberation becomes.
	Sound Source
	Level	REV. LEVEL

		Time
CT. DELAY (Center Delay)			Control Range 0 – 50 msec
Function ..............	These parameters adjust the sound delay for each channel in 8 channel stereo mode.
LS. DELAY (Left Surround Delay)			Control Range 0 – 50 msec
Function ..............	These parameters adjust the sound delay for each channel in 8 channel stereo mode.
RC. DELAY (Rear Center Delay)			Control Range 0 – 50 msec
Function ..............	These parameters adjust the sound delay for each channel in 8 channel stereo mode.
RS. DELAY (Right Surround Delay)			Control Range 0 – 50 msec
Function ..............	These parameters adjust the sound delay for each channel in 8 channel stereo mode.
FL. DELAY (Front Left Delay)			Control Range 0 – 50 msec
Function ..............	These parameters adjust the sound delay for each channel in 8 channel stereo mode.
FR. DELAY (Front Right Delay)			Control Range 0 – 50 msec
Function ..............	These parameters adjust the sound delay for each channel in 8 channel stereo mode.

Resetting to the Factory Preset Value■To reset a parameter to the factory preset value

Select the parameter you want to reset. Then, press and hold + or –until the value stops at the factory preset value temporarily. (The asterisk mark by the parameter name disappears on the video monitor.)

■To reset all of the parameters back to the factory preset values

Use the SET MENU to reset all of the parameter values of all DSP programs within the selected group to the factory preset values. This operation resets all of the parameter values of all DSP programs within that group to the factory preset values.

Notes:

•The available parameters may be displayed on more than one OSD page for some of the programs. To scroll through pages, pressg or h.

•When “MEMORY GUARD!” appears on the screen, the Memory Guard function is on, and you cannot change parameter values. Turn off the

Memory Guard function using the SET MENU.

English

67