Yamaha RXV3000RDS Remote Control

Troubleshooting

Remote Control

	Problem	Possible Cause	What to Do

	The remote control does not	The batteries are dead.	Replace the batteries with new ones and press
	work.		RESET inside the battery compartment.

		The internal microcomputer has “frozen”.	Press RESET inside the battery compartment.

	The remote control does not	Wrong distance or angle.	The remote control will function within a maximum
	function properly.		range of 6 m (20 feet), no more than 30 degrees off-
			axis from the front panel.

		Direct sunlight or lighting (such as an inverter	Change the position of this unit.
		type of fluorescent lamp) is striking the remote
		control sensor of this unit.

		The internal microcomputer has “frozen”.	Press RESET inside the battery compartment.

	The remote control does not	The batteries of this remote control and/or the	Replace the batteries (and press RESET inside the
	“learn” new functions. (The	other remote control are too weak.	battery compartment).
	TRANSMIT indicator does not
	TRANSMIT indicator does not	The distance between the two remote controls is	Place the remote controls at the proper distance.
	light up or flash.)	The distance between the two remote controls is	Place the remote controls at the proper distance.
	light up or flash.)	too far or near.
		too far or near.

		The signal coding or modulation of the other	Learning is not possible.
		remote control is not compatible with this
		remote control.

		Memory capacity is full.	Further learning is not possible without deleting
			unnecessary functions.

		The internal microcomputer has “frozen”.	Press RESET inside the battery compartment.

	Continuous functions such as	The learning process is incomplete.	Be sure to press and hold the function button on the
	volume are learned, but operate		other remote control until TRANSMIT begins
	only for a moment before		flashing slowly.
	stopping.

Appendix

72

Contents

Natural Sound AV Receiver Ampli-Tuner Audio-Video OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG CAUTION Contents Introduction Preparations Basic Operation Advanced Operation Introduction Getting Started Controls and Functions Getting Started Checking the Package Contents Installing Batteries in the Remote Control ■ About changing batteries Controls and Functions Front Panel 10 r q w e 9 8 u y 7 689 0 q weru i y t s a p o Display Indicators 1Processor indicators 2PCM 3SPEAKERS A/B 4Headphones Rear panel 1 Audio component jacks 7 DIGITAL OPTICAL/COAXIAL jacks 2 Video component jacks 8 6CH INPUT jacks Remote Control 9 Operational buttons 0 Sound program selector/Numeric buttons q MUTE w VOLUME +/– Preparations Speaker System Configurations Hookups On-ScreenDisplays (OSD) Speaker Placement Speaker System Configurations ■Eight or Seven Speaker Configuration –FullCinema DSP– ■Six Speaker Configuration –HiFi DSP– ■Five Speaker Configuration –Standard5.1 Channel– ■Four Speaker Configuration –MinimumRequirement– Hookups Connecting Audio Components ■Connecting to digital jacks ■About the dust protection cap ■Connecting a turntable Page Connecting Video Components ■About the video jacks Page Connecting Speakers ■Using speaker cords Page Connecting Subwoofers ■ Connecting a front subwoofer ■Connecting a rear subwoofer Connecting an External Decoder Connecting External Amplifiers q FRONT jacks r CENTER jack w REAR (Surround) jacks Others WARNING ■IMPEDANCE SELECTOR switch ■Connecting the AC power cord ■ AC OUTLETS P01 CONCERT HALL Speaker Placement ■ Placing the Main speakers ■Placing the Center speaker ■Placing the Front Effect, Rear, and Rear Center speakers ■When you use a projection screen Speaker Settings Summary of SPEAKER SET items 1A through 1G TEST DOLBY SUR EFFECT LEVEL L SUR 0dB TEST DSP EFFECT LEVEL FRONT 0dB Basic Operation Basic Playback AM/FM Tuner Basic Recording Basic Playback Power Control Selecting a Source ■BGV (Back Ground Video) function AUTO:DOLBY D AUTO:DTS AUTO:PCM AUTO:ANALOG AUTO: EFFECT OFF AM/FM Tuner Connecting the Antennas AM loop antenna (included) ■Connecting the indoor FM antenna ■Optional outdoor FM/AM antenna ■Connecting the AM loop antenna FM or AM :FM A :FM A-1:FM89.0 MHz STEREO AUTO A-1:FM89.0 MHz E-1:FM A-5:FM EDIT Receiving RDS Stations ■Description of RDS data PS (Program Service name) mode: ■Changing the RDS mode PTY (Program Type) mode: NEWS SPORT Basic Recording Preparations ■Special considerations when recording DTS software Advanced Operation SET MENU Items Remote Control Features Adjusting the Levels of the Effect Speakers Setting the Sleep Timer SET MENU Items SET MENU 1/4 1A CENTER SP 1B MAIN SP 1C REAR L/R SP REAR CT SP 1D REAR CT SP 1E LFE/BASS OUT 1F FRNT EFCT SP 1G MAIN LEVEL 3 L/R BALANCE 4 HP TONE CTRL RENAME 7A CMPNT-VINPUT 7C OPTICAL IN 10A LFE LEVEL 10B D-RANGE 11 LFE LEVEL AUTO 13 SP DELAY TIME 15 MEMORY GUARD Remote Control Features <Main Unit Control Area <Component Control Area ■SOURCE SELECT ■About OPTN ■Light up function Each Component Control Area ■ TUNER button (Tuner area) ■CD button (CD area) ■ MD/TAPE button (MD area*1) ■CD-Rbutton (CD-Rarea) ■PHONO and V-AUXbuttons, and OPTN area*2 ■DVD button (DVD area) ■D-TV/LDbutton (TV area*3) ■VCR1 and VCR2/DVR button (VCR areas*4) ■CABLE and SAT buttons (CABLE and SAT areas*5) ■Å button (ex. LD area*6) Setting the Manufacturer Code in the Remote Control Programming a New Remote Control Function Using the Macro Feature ■Operating the Macro feature ■Programming a Macro Changing the Source Name in the Display Window Clearing a Learned Function or Macro Clearing Learned Functions and Setups Adjusting the Levels of the Effect Speakers Setting the Sleep Timer ■ To set the sleep timer ■To cancel the sleep timer Additional Information Digital Sound Field Processing (DSP) CINEMA-DSP DSP Parameter Digital Sound Field Processing (DSP) Understanding Sound Fields ■Recreating a sound field ■E/R (Early Reflection) ■4ch REV. (Four Channel Reverberation) Hi-FiDSP Programs ■ Europe Hall A ■Europe Hall B ■ U.S.A. Hall C ■Live Concert CINEMA-DSP Sound Design of CINEMA-DSP ■Movie theater programs Dolby Pro Logic + DSP sound field effect Dolby Digital/DTS + DSP sound field effect CINEMA-DSPPrograms Table of Program Names for Each Input Format ■Program groups 7 (Game)~9 ■Program groups 10~12 ■Game Concert Video ■Classical/Opera ■Pop/Rock TV Theater DSP Parameter Changing Parameter Settings Parameter Descriptions INIT. DLY (Initial Delay) P. INT. DLY ROOM SIZE P. ROOM SIZE LIVENESS S. DELAY (Surround Delay) S. INIT. DLY (Surround Initial Delay) S. LIVENESS (Surround Liveness) RC. INIT. DLY (Rear Center Initial Delay) RC. ROOM SIZE (Rear Center Room Size) RC. LIVENESS (Rear Center Liveness) REV. TIME (Reverberation Time) Resetting to the Factory Preset Value ■To reset a parameter to the factory preset value ■To reset all of the parameters back to the factory preset values Appendix Troubleshooting Specifications Troubleshooting Page Tuner Remote Control Specifications Audio Section Video Section FM Section AM Section Page Quick Reference Card ■ Remote Control ■ TUNER button (TUNER area) ■ CD button (CD area) ■MD/TAPE button (MD area) button (TV area) ■A button (ex. LD area)