Yamaha RXV3000RDS Tuner

Troubleshooting

Tuner

	Problem	Possible Cause	What to Do		English

	FM stereo reception is noisy.	transmitter is too far away or the antenna input	Set TUNING MODE to the manual tuning mode.
	FM stereo reception is noisy.	Because of the characteristics of FM stereo	Check the antenna connections.
		broadcasts, this is limited to cases where the	Try using a high quality directional FM antenna.
		is poor.
		is poor.

	There is distortion and clear	There is multipath interference.	Adjust the antenna orientation to eliminate
	reception cannot be obtained		multipath interference.
FM	even with a good FM
FM	antenna.
	antenna.

	A desired station cannot be	The station is too weak.	Use the manual tuning method.
	tuned in with the automatic
	tuned in with the automatic		Use a high quality directional FM antenna.
	tuning method.		Use a high quality directional FM antenna.
	tuning method.

	Previously preset stations	This unit has been unplugged for a long period.	Repeat the presetting procedure.
	can no longer be tuned in
	using preset tuning.

	A desired station cannot be	Weak signal or loose antenna connections.	Tighten the AM loop antenna connections and
	tuned in with the automatic		adjust the antenna’s orientation for best reception.
	tuning method.
	tuning method.		Use the manual tuning method.
			Use the manual tuning method.

AM	There are continuous	Noises result from lightning, fluorescent lamps,	Use an outdoor antenna and a ground wire.
AM	crackling and hissing noises.	motors, thermostats and other electrical	This will help somewhat but it is difficult to
	crackling and hissing noises.	motors, thermostats and other electrical	This will help somewhat but it is difficult to
		component.	eliminate all the noises.

	There are buzzing and	A television set is being used nearby.	Relocate this unit away from the TV.
	whining noises (especially in
	the evening).

71

Contents

Natural Sound AV Receiver Ampli-Tuner Audio-Video OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG CAUTION Contents Introduction Preparations Basic Operation Advanced Operation Introduction Getting Started Controls and Functions Getting Started Checking the Package Contents Installing Batteries in the Remote Control ■ About changing batteries Controls and Functions Front Panel 10 r q w e 9 8 u y 7 689 0 q weru i y t s a p o Display Indicators 1Processor indicators 2PCM 3SPEAKERS A/B 4Headphones Rear panel 1 Audio component jacks 7 DIGITAL OPTICAL/COAXIAL jacks 2 Video component jacks 8 6CH INPUT jacks Remote Control 9 Operational buttons 0 Sound program selector/Numeric buttons q MUTE w VOLUME +/– Preparations Speaker System Configurations Hookups On-ScreenDisplays (OSD) Speaker Placement Speaker System Configurations ■Eight or Seven Speaker Configuration –FullCinema DSP– ■Six Speaker Configuration –HiFi DSP– ■Five Speaker Configuration –Standard5.1 Channel– ■Four Speaker Configuration –MinimumRequirement– Hookups Connecting Audio Components ■Connecting to digital jacks ■About the dust protection cap ■Connecting a turntable Page Connecting Video Components ■About the video jacks Page Connecting Speakers ■Using speaker cords Page Connecting Subwoofers ■ Connecting a front subwoofer ■Connecting a rear subwoofer Connecting an External Decoder Connecting External Amplifiers q FRONT jacks r CENTER jack w REAR (Surround) jacks Others WARNING ■IMPEDANCE SELECTOR switch ■Connecting the AC power cord ■ AC OUTLETS P01 CONCERT HALL Speaker Placement ■ Placing the Main speakers ■Placing the Center speaker ■Placing the Front Effect, Rear, and Rear Center speakers ■When you use a projection screen Speaker Settings Summary of SPEAKER SET items 1A through 1G TEST DOLBY SUR EFFECT LEVEL L SUR 0dB TEST DSP EFFECT LEVEL FRONT 0dB Basic Operation Basic Playback AM/FM Tuner Basic Recording Basic Playback Power Control Selecting a Source ■BGV (Back Ground Video) function AUTO:DOLBY D AUTO:DTS AUTO:PCM AUTO:ANALOG AUTO: EFFECT OFF AM/FM Tuner Connecting the Antennas AM loop antenna (included) ■Connecting the indoor FM antenna ■Optional outdoor FM/AM antenna ■Connecting the AM loop antenna FM or AM :FM A :FM A-1:FM89.0 MHz STEREO AUTO A-1:FM89.0 MHz E-1:FM A-5:FM EDIT Receiving RDS Stations ■Description of RDS data PS (Program Service name) mode: ■Changing the RDS mode PTY (Program Type) mode: NEWS SPORT Basic Recording Preparations ■Special considerations when recording DTS software Advanced Operation SET MENU Items Remote Control Features Adjusting the Levels of the Effect Speakers Setting the Sleep Timer SET MENU Items SET MENU 1/4 1A CENTER SP 1B MAIN SP 1C REAR L/R SP REAR CT SP 1D REAR CT SP 1E LFE/BASS OUT 1F FRNT EFCT SP 1G MAIN LEVEL 3 L/R BALANCE 4 HP TONE CTRL RENAME 7A CMPNT-VINPUT 7C OPTICAL IN 10A LFE LEVEL 10B D-RANGE 11 LFE LEVEL AUTO 13 SP DELAY TIME 15 MEMORY GUARD Remote Control Features <Main Unit Control Area <Component Control Area ■SOURCE SELECT ■About OPTN ■Light up function Each Component Control Area ■ TUNER button (Tuner area) ■CD button (CD area) ■ MD/TAPE button (MD area*1) ■CD-Rbutton (CD-Rarea) ■PHONO and V-AUXbuttons, and OPTN area*2 ■DVD button (DVD area) ■D-TV/LDbutton (TV area*3) ■VCR1 and VCR2/DVR button (VCR areas*4) ■CABLE and SAT buttons (CABLE and SAT areas*5) ■Å button (ex. LD area*6) Setting the Manufacturer Code in the Remote Control Programming a New Remote Control Function Using the Macro Feature ■Operating the Macro feature ■Programming a Macro Changing the Source Name in the Display Window Clearing a Learned Function or Macro Clearing Learned Functions and Setups Adjusting the Levels of the Effect Speakers Setting the Sleep Timer ■ To set the sleep timer ■To cancel the sleep timer Additional Information Digital Sound Field Processing (DSP) CINEMA-DSP DSP Parameter Digital Sound Field Processing (DSP) Understanding Sound Fields ■Recreating a sound field ■E/R (Early Reflection) ■4ch REV. (Four Channel Reverberation) Hi-FiDSP Programs ■ Europe Hall A ■Europe Hall B ■ U.S.A. Hall C ■Live Concert CINEMA-DSP Sound Design of CINEMA-DSP ■Movie theater programs Dolby Pro Logic + DSP sound field effect Dolby Digital/DTS + DSP sound field effect CINEMA-DSPPrograms Table of Program Names for Each Input Format ■Program groups 7 (Game)~9 ■Program groups 10~12 ■Game Concert Video ■Classical/Opera ■Pop/Rock TV Theater DSP Parameter Changing Parameter Settings Parameter Descriptions INIT. DLY (Initial Delay) P. INT. DLY ROOM SIZE P. ROOM SIZE LIVENESS S. DELAY (Surround Delay) S. INIT. DLY (Surround Initial Delay) S. LIVENESS (Surround Liveness) RC. INIT. DLY (Rear Center Initial Delay) RC. ROOM SIZE (Rear Center Room Size) RC. LIVENESS (Rear Center Liveness) REV. TIME (Reverberation Time) Resetting to the Factory Preset Value ■To reset a parameter to the factory preset value ■To reset all of the parameters back to the factory preset values Appendix Troubleshooting Specifications Troubleshooting Page Tuner Remote Control Specifications Audio Section Video Section FM Section AM Section Page Quick Reference Card ■ Remote Control ■ TUNER button (TUNER area) ■ CD button (CD area) ■MD/TAPE button (MD area) button (TV area) ■A button (ex. LD area)