![](/images/new-backgrounds/1303695/30369521x1.webp)
Using the Controls
1 Slide the POWER switch, located on the rear of the instrument, to its ON position. The lamp will light green.
2 Connect the stereo earphones to the PHONES jack on the side of the instrument, make sure that the L & R side earphones are used in the correct ears.
3 Rotate the VOLUME dial to the desired playing level.
Lights green
•Do not operate at high volume levels when using earphones. Doing so can lead to irreparable damage to your hearing.
The Reverb
The Silent Violins incorporates Yamaha’s DSP reverb technology. Play while trying out the three types of reverb.
1 Slide the POWER switch to the REV. ON position, the lamp will light red, and reverb will be applied to the Silent Violin’s sound.
2 Slide the REVERB switch to select one of the three reverb modes.
Lights red
•ROOM mode ........ this reverb simulates the natural reverberation found in a room.
•HALL 1 mode ...... this reverb simulates the natural reverberation found in a hall.
•HALL 2 mode ...... the same reverb simulation as HALL 1 but with a longer decay time.
11