Yamaha SW-3 If your amplifier has two sets of speaker terminals, Connecting to this unit’s OUTPUT/INPUT terminals, How to Connect:

If your amplifier has two sets of speaker terminals

	Amplifier
A	B
Right speaker	(Both “A” and “B” outputs	Left speaker
	must be ON.)

This unit

INPUT2INPUT1

FROM AMPLIFIER

OUTPUT

TO SPEAKERS

To AC outlet

English

Connecting to this unit’s OUTPUT/INPUT terminals

For connections, cut the speaker wires as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If these wires are reversed, the sound will be unnatural and will lack bass.

Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit, your amplifier and/or speakers.

*Banana Plug connections are also possible. Simply insert the Banana Plug connector into the corresponding terminal.

How to Connect:

Red: positive (+)

Black: negative (–)

2

1

3

1Unscrew the knob.

2Insert the bare wire. [Remove approx. 5mm (1/4”) insulation from the speaker wires.]

3Tighten the knob and secure the wire.

7