Yamaha TRX-1R, TRX-1T owner manual Connecting the wireless receiver unit, No Good, Connections

CONNECTIONS

Connecting the wireless receiver unit

■Attaching the cable plugs (A) to the speaker cables

1Pull both sides of the cover of the cable plug (A) firmly away from the top of the plug, then partially remove the top part of the cover.

2Peel away about 15 mm of covering from the tip of a commercially available speaker cable and twist the cable core firmly in a clockwise direction.

Twisting loosely may cause a short circuit.

15 mm

Good No Good

3Match the speaker cable polarity (+/–) with the polarity mark (+/–) of the cable plug, then insert each cable core into the cable plug (A). Be sure that it is firmly in contact with the metal part of the speaker cable.

4Replace the cover.

Attach the other cable plug (A) in the same way.

■Connecting the wireless receiver unit

1Remove the cover from the wireless receiver unit as shown below, to access the connection terminal. Connect your rear speaker terminals with the corresponding color terminals on the wireless receiver unit. Reattach the cover.

Surround R	Surround L
speaker	speaker

(Gray)

←(Blue)

To

AC outlet

2Insert the stand into the brackets as shown below.

3Connect the AC power cable of the wireless receiver unit to an AC outlet.

4