Yamaha TSS-1 Adjusting speaker balance, Playing a source, MASTER VOLUME, Refer to the “, Refer to the “, 3 Turn on this system, * The test tone stops, 2 Turn on this system

Adjusting speaker balance

This procedure lets you adjust the sound output level balance between the front, center, surround speakers and the subwoofer by using the built-in test tone generator. Make this adjustment so that each speaker output level becomes almost the same when heard at the listening position. This is important for high performance of the builtin DTS decoder and Dolby Digital decoder.

*Once you have completed this adjustment, you can adjust the overall volume level of this system only by using the MASTER VOLUME control.

	DIGITAL
	INPUTS
SPEAKER	OPTICAL
OUTPUTS
L
FRONT	COAXIAL
R
L
SURROUND
R	ANALOG
	INPUTS
	1
	FRONT
	SURROUND
	2
CENTER
S. WOOFER
SPEAKER
MODE
5CH
4CH
2CH

1 Set the SPEAKER MODE switch to “5CH” if it is set to another position.

2 Turn the MASTER VOLUME control fully counterclockwise to decrease the volume to minimum.

3 Turn on this system.4 Set the CENTER, SURROUND and SUBWOOFER level controls at the center position.

CENTER SURROUND SUBWOOFER

5 Press the TEST button.6 Adjust the master volume to the desired level.

*You will hear a test tone (like pink noise) from respective speakers for about two seconds in the following order: front speakers, center speaker, surround speakers and subwoofer .

7 Adjust the CENTER, SURROUND and

SUBWOOFER level controls while listening a series of test tones so that their levels become almost the same with the front speakers’ level.

8 When the adjustment is completed, press the TEST button.* The test tone stops .

Playing a source

This section explains how to turn on this system and select input sources. Before turning on this system, turn on the external audio unit to be used.

DIGITAL	INPUT	3
4CH
2CH
DTS	MODE	6
DIGITAL
PROLOGIC	TEST
	MUTE

CENTER

SURROUND

SUBWOOFER

1, 5

MASTER VOLUME

Active Servo

Technology

HOME THEATER SOUND SYSTEM

TSS-1

2

1 Turn the MASTER VOLUME control fully counterclockwise to decrease the volume to minimum.

2 Turn on this system.3 Select the appropriate input mode by pressing theINPUT selector button.*The indicator for the selected input mode lights up.

*Refer to the “ Controls & connectors” on page 4 for details about the input modes.

4 Play s source on the external unit.5 Adjust the volume to the desired level.6 As you prefer, select a surround mode.

*Refer to the “ Controls & connectors” on page 4 for details about the surround modes.

E-8