7SUBWOOFER level control

This control is used for adjusting the level of sound outputted from the subwoofer. Turn this control clockwise to increase the level, and counterclockwise to decrease the level.

8MASTER VOLUME control

This control is used for adjusting the whole volume level of this system. Turn this control clockwise to increase the level, and counterclockwise to decrease the level.

9Headphone jack

Stereo headphones can be connected to this mini-jack for private listening. Sound output from the speakers are cut off when headphones are connected to this jack.

Sounds of all channels are mixed into 2-channels and outputted from the headphones.

0Power indicatorLights up when the power of this system is on.APower switch

Each press of this switch changes the status of this system between standby mode and power on. When the power is on, the power indicator (0) lights up.

*Note that this system uses a small amount of power in the standby mode.BSPEAKER OUTPUTSFRONT:

Connect one satellite speaker with a 3 m cord to the L terminal and another to the R terminal. They are used as the front speakers.

SURROUND:

Connect one satellite speaker with a 7 m cord to the L terminal and the other to the R terminal. They are used as the surround speakers.

CENTER:

Connect one satellite speaker with a 3 m cord to this terminal. It is used as the center speaker.

CSPEAKER MODE switch

Normally, set this switch to 5CH. According to your preference, set this switch to another position.

5CH:All speakers are used in this mode.

4CH:

Select this position when you will not use the center speaker. In this mode, center sound is outputted from the front L and R speakers.

2CH:

Select this position when you wish to output sounds in 2-channels only. In this mode, sounds of all channels are mixed and outputted from the front L and R speakers. The surround speakers output the same sounds as the front speakers.

DDC IN connectorConnect the supplied AC adaptor to this connector.EDIGITAL INPUTS

External units which has digital signal output terminals can be connected to these terminals.

Input signals received at the OPTICAL terminal have priority over the signals at the COAXIAL terminal. When both terminals receive signals, the signals at the OPTICAL terminal are reproduced with this system.

OPTICAL:

Connect an external unit (a DVD/CD player, an MD recorder, a video game player, etc.) which has an optical digital signal output terminal to this terminal by using the supplied optical cable.

COAXIAL:

Connect an external unit (a DVD/CD player, an MD recorder, a video game player, etc.) which has an coaxial digital signal output terminal to this terminal by using the supplied coaxial cable.

FANALOG INPUTS

Connect analog signal output terminals of an external unit to these mini-jack terminals by using the supplied mini plug cables or commercially available pin-to-mini plug cables.

FRONT:

Connect an analog (stereo) signal output terminal of an external unit to this terminal by using a supplied mini plug cable. When you connect a sound board on a computer which has four channel output terminals, connect the front channel output terminal of the sound board to this terminal.

SURROUND:

When you connect a sound board on a computer which has four channel output terminals, connect the rear channel output terminal of the sound board to this terminal.

English

E-7