Yamaha TSS-10 owner manual Checking The Accessories, Installing Batteries In The Remote Control

CHECKING THE ACCESSORIES

Check your package to make sure it contains the following items.

Remote control	Batteries	Power cable	Fastener (1 set)	Non-skid pads
	(AAA, R03, UM-4)		(for the center speaker)	(3 sets: 24 pieces)

INPUT

MODE

REAR

S.WOOFER

VOLUME

MUTE TEST

AC adaptor (LSE9802B1540)

3.5 mm stereo mini/	Stand	Screws
RCA stereo pin cable	(for the amplifier unit)	(2 pieces)

Optical cable Audio pin cable

INSTALLING BATTERIES IN THE REMOTE CONTROL

Insert the batteries in the correct direction by aligning the

+and – marks on the batteries with the polarity markings (+ and –) inside the battery compartment.

2

1

3

1Press the part and slide off the battery compartment cover.

2Insert the two batteries (AAA, R03, UM-4 type) with + and – oriented properly.

The batteries can be set only from the direction shown in the figure.

3Slide the cover back on so that it snaps into place.

■Notes on batteries

•Change all of the batteries if you notice a decrease in the operating range of the remote control.

•Do not use old batteries together with new ones.

•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

2