TROUBLESHOOTING

In case of a problem with the unit, check the following list first. If you cannot solve your problem with the suggested solutions or if your problem is not listed below, turn off and unplug the unit, and consult the nearest authorized Yamaha dealer or service center.

General

Problem

Cause

Solution

 

 

 

 

 

 

 

 

The system turns on but

The power cable may be connected

Make sure the power cable is plugged

 

 

immediately shuts off.

improperly.

into the wall outlet firmly.

 

 

 

 

 

 

 

 

 

The unit may have received a strong

Set the system to off, and disconnect

 

 

 

electrical shock such as lightning or

the power cable. Wait about 30

 

 

 

excessive static electricity.

seconds, reconnect the power cable, and

 

 

 

 

turn on the system.

 

 

 

 

 

 

 

 

The speakers make no

The volume may be set to the

Adjust the volume level (☞ P. 9).

 

 

sound.

minimum level.

 

 

 

ADDITIONAL INFORMATION

 

 

 

 

 

 

The mute function may be on.

Cancel the mute function (☞

P. 9).

 

 

 

 

 

 

 

 

 

 

The source may be incorrect.

Select the correct source (☞ P. 9).

 

 

 

 

 

 

 

Sound suddenly turns off.

The sleep timer (☞ P. 8) may be set.

Turn on the system and play the source

 

 

 

 

again.

 

 

 

 

 

 

 

 

The unit does not operate

The unit may have received a strong

Set the system to off, and disconnect

 

 

properly.

electrical shock such as lightning or

the power cable. Wait about 30

 

 

 

excessive static electricity, or power

seconds, reconnect the power cable, and

 

 

 

supply may have dropped.

turn on the system.

 

 

 

 

 

 

 

 

A digital or high-frequency

The unit may be placed too close to

Place the unit farther away from the

 

 

equipment produces noises.

the digital or high-frequency

equipment.

 

 

 

 

equipment.

 

 

 

 

 

 

 

 

 

The clock setting has been

The unit is left more than one week

Plug the power cable into the wall

 

 

cleared.

after you disconnect the power cable

outlet firmly, and set the clock again

 

 

 

from the wall outlet.

(☞ P. 4).

 

 

 

 

 

 

 

 

 

iPod™

Problem

Cause

Solution

 

 

 

 

 

“iPod Connect Error”

There is a problem with

Turn off the system and reconnect your

 

 

appears on the front panel

communication between the unit and

iPod to the unit.

 

display.

your iPod.

 

 

 

 

 

 

 

The iPod does not charge

The iPod is set in the iPod dock

Remove the iPod from the unit, then set

 

 

up.

improperly.

it in the iPod dock again.

 

 

 

 

 

 

“iPod Not Connected”

 

 

 

 

appears on the front panel

 

 

 

 

display after you set the

 

 

 

 

iPod.

 

 

 

 

 

 

 

 

 

The iPod makes no sound.

 

 

 

English

 

 

 

 

The iPod sounds, but you

 

 

 

 

 

 

 

cannot operate it with the

 

 

 

 

unit or the remote control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15 En