PREPARATIONS BEFORE USING THIS UNIT

Turning on/off the system

1Connect the power cable to the wall outlet.

2Press ON/OFF to turn on the system.

When the system is on: “Hello” appears, then clock and other information are displayed.

Example: iPod playback mode display

When the system is off: “Good-bye” appears, then only date and time are displayed.

y

•This unit has an auto off function, which will automatically switch the system to off if the system is left turned on for 1 hour without playback or any other operation being performed. This function is only available when the source is set to iPod.

•Press and hold ON/OFF on the top of the unit for more than 3 seconds to set the system to standby mode. All the information on the front panel display is not displayed in standby mode.

This can reduce the power consumption. To cancel standby mode, press ON/OFF.

•Even in system off/standby mode, the alarm function is available.

•The memory back-up circuit prevents stored data such as the time setting from being lost even in system off/standby mode.

Adjusting the clock

The clock is not set at the factory.

1Press CLOCK SET.

2Select each setting with MENU S/T and confirm with Center.

You can set YEAR → MONTH → DAY → TIME.

Notes

•This operation can be performed only with the remote control.

•Time appears in 12-hour notation (AM/PM), depending on the model. For example, “4:00PM”.

•You can switch 12-hour/24-hour notation by pressing

FUNCTION → MENU S/T → Center to select TIME FORMAT, then pressing MENU S/T → Center to select

12H/24H.

•The time settings are lost after one week when the power cable is disconnected from the wall outlet.

4 En