USING USEFUL FUNCTIONS
Using the alarm functions
The unit has the dual alarm function. Each alarm time always appears on the right/left sides of the clock on the front panel display. When the alarm is set to on, the alarm indicator and time light up.
You can set the different music to the alarm from what you listen to during the setting.
Note
This operation can be performed only with the buttons on the top of the unit.
■Setting the alarm time and sound
Note
To cancel the alarm function setting during the operations, press SETUP1/SETUP2. The alarm is not set.
1Start setting ALARM1/ALARM2.
When you want to set the alarm to ALARM1, set on SETUP1, and SETUP2 is for ALARM2.
2Set the alarm time.
1 While setting the alarm function, the alarm indicator blinks.
2 The item you are setting also blinks.
3 The > mark on the right side means that you have other menu items on the following screens. You can go to the next menu item setting by pressing
ENTER.
3Select and set TYPE → BEEP →
SOURCE → VOLUME.
1After setting the alarm time, select the alarm type from BEEP/BEEP+MUSIC/MUSIC.
–BEEP: beep sound only
–BEEP+MUSIC: beep sound and music selected in an input source, iPod/FM
–MUSIC: music only
If you set TYPE to BEEP+MUSIC, you can play back the desired music in an input source, iPod/ FM and beep sound together at the time you set. The music volume gradually increases to wake you up comfortably, and then the beep sound plays back at the time you set.
OPERATION
English