Yamaha TX-670RDS TUNING OPERATIONS, Display information, 5 Tune to a desired station, Refer to page 14 for details, For FM reception, set the MODE, BLEND and IF MODE

TUNING OPERATIONS

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING).

AUTOMATIC TUNING

4

1 5, 6

2 3

English

1 POWER

2 Select the reception band (FM or AM) while watching the display.

	FM/AM
	FM	or		AM
3	TUNING MODE	STEREO
	WIDE	0	50	100
		AUTO TUNING
4	For FM reception, set the MODE, BLEND and IF MODE
	buttons as desired. (Refer to page 8 for details.)

5 Tune to a desired station.

To tune to a higher frequency, slightly turn the control to the right. To tune to a lower frequency, slightly turn the control to the left.

6 If the station where tuning search stopped is not the desired one, follow step 5 again.

*If the tuning search does not stop at the desired station, change to the MANUAL TUNING method as described on the following page.

Display information

➀➁

						➂
FM	MHz	STEREO
		WIDE 0		50	100
			AUTO TUNING

➀Displays the band and frequency of the received station.

*If an RDS station is received, the frequency is then replaced by the station name. (However, if the PS data cannot be received within 5 seconds, “NO PS” flashes, and then it returns to the frequency display.)

Refer to page 14 for details.➁Illuminates when an FM stereo broadcast is received in stereo.➂Indicates the signal level of the received station.

7