Yamaha TYROS - page 128

Reference

128 TYROS Owner’s Manual

126

Quick Guide on page 51

Registration Memory

Basic instructions on using the Registration Memory are explained in the “Quick Guide.” This section gives detailed

information on the Freeze and Registration Sequence functions not covered in the “Quick Guide.”

■ About User Voices and Registration Memory.......................................................................................

When you memorize a panel setup to Registration Memory that uses a User voice (on the User or Disk drive), keep in mind

that the actual User voice is not memorized to Registration Memory — only its settings are.

Registration Memory saves and recognizes a User voice as:

• The preset voice on which the User voice is based

• The parameter settings made in Sound Creator

Selecting a Registration Memory number with User voice calls up the two above, and not the User voice on the drive. This

means that the actual User voice could be changed or even deleted from the drive, and yet still be available in Registration

Memory.

Freeze Quick Guide on page 53

This section brieﬂy covers details on the Freeze function. For basic instructions on Freeze, refer to the “Quick Guide.”

1Call up the Registration Freeze display via [FUNCTION] → FREEZE and

select the parameter group to be “frozen” or unchanged.

2Turn the [FREEZE] button on.

3You can check whether your Freeze settings are correct or not by chang-

ing the Registration Memory number.

Registration Sequence

As convenient as the Registration Memory buttons are, there may be times during a performance when you want to quickly switch

between settings — without having to take your hands from the keyboard. The convenient Registration Sequence function lets

you call up the presets in any order you specify, by simply using the [BACK]/[NEXT] buttons or the pedal as you play.

1Select a Registration Memory bank of which the sequence is programmed.

2Call up the Registration Sequence display via [FUNCTION] → REGISTRATION

SEQUENCE.

FUNCTION SOU

CRE

Select a parameter group

to be set.

• The settings on the Registration

Freeze display can be saved to

the User or Disk drive on the

[FUNCTION]

→

UTILITY

→

SYS-

TEM SETUP display as a System

Setup ﬁle (page 65).

These enter and remove checkmarks from the parame-

ter groups. If you want a parameter group to remain

unchanged even when changing Registration Memory

numbers, enter a checkmark to the appropriate box.

Settings in the Registration

Freeze display are automati-

cally saved to Flash ROM when

you exit from the display. How-

ever, if you turn the power off

without exiting from this dis-

play, the settings will be lost.

FREEZE

REGISTRATION MEMORY

FREEZE

BACK NEXT

Two functions – changing a Bank according to the order listed on the Open/

Save display and changing the Memory number according to the order deter-

mined from the Registration Sequence display – can be assigned to the

[BACK]/[NEXT] button and the foot pedal connected to the TYROS.