30
Insertion Effect 1 Unit
1CONNECT selector
Click on the text box and choose the order in which signals are passed from one insertion
effect unit to the other.
2Indicator lamps
These show which of the Elements are assigned to the respective Insertion Effect unit. The
Indicator lamps are not available for Drum Voices.
3[DETAIL] button
Click this to open the Insertion Effect dialog and set the detailed parameters.
4Effect Type selector
Click on the text box and choose the type of Insertion Effect.
Insertion Effect 2 Unit
Same as Insertion Effect 1 Unit. See above.
System Effects
●Reverb Unit
1Reverb Send
Use this knob to set the level of the signal of Insertion Effect 1/2 (or the by-passed signal) sent
to the Reverb Effect.
2Reverb Effect Type selector
Click on the text box and choose the type of Reverb Effect.
3Reverb Pan controls
Use these knobs to set the stereo positioning of the Reverb Effect.
4Reverb Return controls
Use these knobs to set the amount of Reverb Effect that is used in the output signal.
1
2
3
4
3
4
1
2345