33
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections
before checking the following.
Sound does not change when using knobs or sliders.
• Are the MIDI Out port and Device Number set correctly in the Editor Setup? (page 14)
No sound heard when clicking on-screen keyboard in Edit Window.
• Is the MIDI channel set correctly in the Editor Setup? (page 14)
Sound does not change when Monitor button is pressed.
• Are the MIDI Out port and Device Number set correctly in the Editor Setup? (page 14)
Bulk data is not transmitted.
• Are the MIDI Out port and Device Number set correctly in the Editor Setup? (page 14)
• Is the Dump Interval in the Editor Setup too short? Make sure to adjust the Dump Interval.
Bulk data is not received.
• Open the Setup Dialog and check that the Device Number has been properly assigned
(page 14).
• Is the MIDI Thru port set to off in the client application?
MIDI In/Out port is not available in Editor Setup.
•The MIDI In/Out port in Editor Setup is selected from the MIDI In/Out ports in the host appli-
cation. Check the MIDI In/Out settings in the host application.
The USB port is not recognized.
•Check whether the USB driver has been installed to your computer correctly. See the instal-
lation manual for details.