Control function operation
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera- tion.
ECJ00030
NOTICE
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the remote control transmit- ter.
EJU31384
Yamaha Security System (VX Deluxe / VX Cruiser)The Yamaha Security System functions to help prevent unauthorized use or theft of the watercraft. The lock and unlock modes of the security system can be selected by operating the remote control transmitter that is included with this watercraft. The engine cannot be started if the lock mode of the security system is selected. The engine can only be started if the unlock mode is selected. (See page 30 for information on the remote control transmitter.)
Number of | Yamaha Security | “SECURI- | |
TY” indi- | |||
beeps | System mode | ||
cator light | |||
|
| ||
|
|
| |
| Lock | Goes off | |
|
|
| |
| Unlock | Comes | |
| (normal operation | ||
| on | ||
| mode) | ||
|
| ||
|
|
| |
| Unlock | Comes | |
| (Low RPM Mode) | on | |
|
|
|
TIP:
●The beeper sounds two times for the nor- mal operation mode or three times for the Low RPM Mode. (See page 37 for Low RPM Mode activation procedures.)
●If the remote control transmitter is operated
while the multifunction information center is in the standby state, the center will perform the initial operation, and then the setting is selected.
To select the lock mode:
Push the lock button on the remote control transmitter briefly. The beeper sounds once and the “SECURITY” indicator light blinks once, then goes off. This indicates the lock mode is selected.
TIP:
The Yamaha Security System settings can only be selected while the engine is stopped.
EJU36106
Yamaha Security System settings
The Yamaha Security System settings will be confirmed by the number of beeps when the remote control transmitter is operated, and by the “SECURITY” indicator light of the multi- function information center. (See page 39 for information on the multifunction information center.)
12
1Lock button
2“SECURITY” indicator light
To select the unlock mode:
Push the
31