Yamaha 006IPTO-F0, WD83390

168 Chapter 14—Scene Memories

DM1000 Version 2—Owner’s Manual

Fading Scenes

You can specify the time it takes the Input and Output Channel faders to move to their new

positions when a Scene is recalled. This is called Fade Time, and it can be set for each chan-

nel in the range of 00.0 through 30.0 seconds (in 0.1 second steps). You can set the Fade

Time for each Scene individually or for all Scenes globally.

Fading Input Channels

To set the Fade Time for Input Channels 1–48, press the DISPLAY ACCESS [SCENE] but-

ton repeatedly until the Scene | In Fade page appears. Move the cursor to the desired chan-

nel parameter box, then rotate the Parameter wheel or press the [INC]/[DEC] buttons to

modify the Fade Time setting.

AGlobal Fade Time

When this check box is checked, a Scene is recalled using the currently-speciﬁed Fade

Time. (The Fade Time setting stored in the recalled Scene is temporarily ignored.) This

check box setting works in unison with the Out Fade page.

BALL INPUT CLEAR

This button resets all channel Fade Times on the page to 00.0 second.

CINPUT CH1–48

These parameters enable you to set the Fade Time for each Input Channel in the range

of 00.0 through 30.0 seconds. The Fade Time setting for one channel in a pair works in

unison with its partner.

Tip:

•After you set the Fade Time, if you operate a certain fader while recalling a Scene, the fader’s

Fade Time setting is ignored.

•You can copy the currently-selected Input Channel Fade Time setting to all Input Channels

by double-clicking the [ENTER] button. This is convenient when you wish to set the Fade

Time for all channels simultaneously.