Fading Scenes 169
DM1000 Version 2—Owner’s Manual
Scene Memories
14
Fading Output Channels
To set the Fade Time for the Output Channels (Stereo Out, Bus Outs 1–8, Aux Outs 1–8),
press the DISPLAY ACCESS [SCENE] button repeatedly until the Scene | Out Fade page
appears.
The basic operation is the same as on the In Fade page.
ABUS1–8
These parameters enable you to set the Fade Time for each Bus Out (1–8) in the range
of 00.0 through 30.0 seconds.
BAUX1–8
These parameters enable you to set the Fade Time for Aux Outs 1–8.
CSTEREO
This parameter enables you to set the Fade Time for the Stereo Out.
DINPUT MASTER A–H
These parameters enable you to set the Fade Time for Input Fader Group Master A–H.
EOUTPUT MASTER Q–T
These parameters enable you to set the Fade Time for Output Fader Group Master Q–T.
Tip: You can copy the currently-selected Output Channel Fade Time setting to all Output
Channels by double-clicking the [ENTER] button.
3
2
5
4
1