Yamaha 006IPTO-F0, WD83390

72 Chapter 6—Input Channels

DM1000 Version 2—Owner’s Manual

DD button

When this button is turned on, the currently-selected Input Channel is routed to its

Direct Out. See page 115 for more information on the Direct Out.

EALL STEREO button

This button turns on the S button for all channels on the page.

FALL BUS button

This button turns on the Bus buttons 1–8 for all channels on the page.

GALL CLEAR button

This button clears all routing assignments on the page.

HSURROUND MODE

This ﬁeld displays the current Surround mode.

Viewing Input Channel Settings

You can view and adjust parameter settings for the currently-selected Input Channel on the

View | Parameter or Fader pages.

■Viewing the Gate, Compressor, and EQ Settings

To display the View | Parameter page for a speciﬁc Input Channel, use the corresponding

[SEL] button or fader to select the desired channel, then press the DISPLAY ACCESS

[VIEW] button, then the [F1] button.

Move the cursor to a parameter you wish to change, and rotate the Parameter wheel or press

the [INC]/[DEC] buttons or [ENTER] button to modify the setting.

AGATE section

This section enables you to turn the gate-type dynamics processor on or off and set the

parameters. (See page 65 for more information.)

BCOMP section

This section enables you to turn the compressor-type dynamics processor on or off and

set the parameters. (See page 66 for more information.)

CINSERT section

This section enables you to turn the Insert on or off and patch the Insert In and Out.

(See page 116 for more information.)

DEQ section

This section enables you to set various EQ parameters. (See page 68 for more informa-

tion.)