Naming Input Channels 79
DM1000 Version 2—Owner’s Manual
6
Input Channels
Naming Input Channels
By default, Input Channels are named CH1, CH2, etc. You can change these names if nec-
essary. For example, it may be helpful for mixdown if you name a particular Input Channel
with the type of musical instrument connected to the corresponding input jack.
1 Press the DISPLAY ACCESS [INPUT PATCH] button repeatedly until the In
Patch | CH Name page appears.
You can specify Short names in the center column (1) and Long (full) names in the right
column (2).
When the Name Input Auto Copy check box (3) is on, the first four characters of a
newly-entered Long name are automatically copied to the Short name. On the other hand,
a newly-entered Short name is automatically added to the beginning of the Long name.
You can reset all channel names to their default names by moving the cursor to the INI-
TIALIZE button, then pressing [ENTER].
2 Move the cursor to a name you wish to change, then press [ENTER].
The Title Edit window appears, enabling you to enter a name.
3 Edit the name, move the cursor to the OK button, then press [ENTER].
The new name is now effective.
Tip: The edited name is stored in the Input Patch library.
1 2
3