96 Chapter 8—Aux Sends
DM1000 Version 2—Owner’s Manual
EQ settings
To set the EQ for Aux Out 1–8, press the EQUALIZER [DISPLAY] button repeatedly to dis-
play the EQ | EQ Edit page, and use the [SEL] buttons or faders to select Aux Out 1–8.
The parameters on this page (and the procedure for setting them) are the same as for Input
Channels (see page 68).
Viewing Aux Out settings
You can view and adjust the parameter settings for the currently-selected Aux Out on the
View | Parameter and Fader pages.
■Viewing the Compressor and EQ Settings
To display the View | Parameter page, use the corresponding [SEL] button or fader to select
the desired Aux Out (1–8), then press the DISPLAY ACCESS [VIEW] button, then the [F1]
button.
The parameters on this page (and the procedure for setting them) are the same as for Input
Channels, except that this page does not include the Gate and Phase parameters (see
page 72).