133
Using scene memories
LS9-16/32 Owner’s Manual
13
Scene memory
2Move the cursor to the USER DEFINED
KEYS button and press the [ENTER] key to
access the USER DEFINED KEYS popup
window.
The USER DEFINED KEYS popup window lets you
assign functions to user defined keys [1]–[12].
3Move the cursor to the popup button for the
user-defined key to which you want to
assign a function, and press the [ENTER]
key.
The USER DEFINED KEY SETUP popup window
will appear.
4Move the cursor to the FUNCTION column,
and use the dial or the [DEC]/[INC] keys to
select “SCENE.”
In this popup window, you will proceed as follows
depending on the function you want to assign.
To assign INC RECALL or DEC RECALL
Move the cursor to the PARAMETER 1 column, and
use the dial or the [DEC]/[INC] keys to select “INC
RECALL” or “DEC RECALL.”
To assign DIRECT RECALL
Move the cursor to the PARAMETER 1 column, use
the dial or the [DEC]/[INC] keys to choose “DIRECT
RECALL,” and then choose “SCENE #xxx” (xxx is
the scene number) in the PARAMETER 2 column.
5When you’ve finished making settings,
move the cursor to the OK button and press
the [ENTER] key to close the popup win-
dow.
If desired, assign scene-recall functions to other user-
defined keys in the same way.
6Press the user-defined key to which you
assigned a recall function.
The corresponding scene will be recalled.
User defined keys popup buttons