135
Editing scene memories
LS9-16/32 Owner’s Manual
13
Scene memory
3If you want the scenes to be listed in a dif-
ferent order, move the cursor to the “NO.” or
“TITLE” buttons located above the scene
list, or to “TIME STAMP” located above the
STATUS/TIME STAMP field, and press the
[ENTER] key.
1NO.
Sorted in order of scene number.
BTITLE
Sorted in numeric/alphabetical order of title.
CCOMMENT/TIME STAMP
Sorted in order of comment or date of creation.
4If you want to edit the title of a scene, move
the cursor to the TITLE field of the selected
scene, and press the [ENTER] key to
access the SCENE TITLE EDIT popup win-
dow.
For details on entering text, refer to “Assigning a
name” ( p. 34).
1TITLE field
This field lets you enter a title for the scene. (The max-
imum is 16 characters.)
5To turn the protect setting on/off for a
scene, move the cursor to the R symbol /
protect symbol of the selected scene, and
press the [ENTER] key.
Each time you press the [ENTER] key, the indication
will alternate between the protect (lock) symbol, R
(read only) symbol, and no symbol.
Protect (lock) symbol
The scene cannot be overwritten.
R (read only) symbol
In addition to the protection described above, it will
also be impossible to overwrite the scene by loading a
file from USB memory, etc.
This setting can be selected only for consecutive scene
numbers from scene number 000.
No symbol
The scene is not protected.
6Use the tool buttons to edit the scene mem-
ory.
For details, refer to the section “Scene memory edit-
ing” that follows.
1 2 3
• By leaving the cursor at the same button and pressing the
[ENTER] key again, you can change the direction (ascending
or descending) in which the list is sorted.
HINT
1
•You cannot edit the title of a read-only scene or a write-pro-
tected scene.
• If you want to edit the comment of a scene, use the COM-
MENT/TIME STAMP tabs to display the comments in the
scene list, move the cursor to the SCENE COMMENT field of
the selected scene, and press the [ENTER] key to access the
COMMENT EDIT popup window.
HINT
• The R symbol for scene number 000 cannot be disabled.
NOTE