21
Using the Setup Button
The WX5 hardware wind gain for the wind sensor is
set as described on page 25. Set both the hardware
and software wind gain for optimum playability.

Octave Transpose

The MIDI note numbers transmitted by the WX5 can
be shifted up or down by one or two octaves by using the
Octave keys in conjunction with the Setup button.
– 2
5 Stages
– 1 0+ 1 + 2
Setup Button + Up 1 Octave Key
MIDI note numbers shifted up one octave each time the
Up 1 Octave key is pressed.
Setup Button + Down 1 Octave Key
MIDI note numbers shifted down one octave each time
the Down 1 Octave key is pressed.
Setup Button + Up 1 and Down 1 Octave Keys
Resets the octave to “0”.
nrm hrd
nrm wide
P/B M/W
off on
tht loos B Fl
off on
PB gen
MW filt
off on
nrm hrd
nrm wide
P/B M/W
off on
tht loos B Fl
off on
PB gen
MW filt
off on
nrm hrd
nrm wide
P/B M/W
off on
tht loos B Fl
off on
PB gen
MW filt
off on

Audition Function On/Off

When the Audition function is on, the tone generator
will produce sound even when breath pressure is not ap-
plied to the WX5. This can be handy when selecting voices
or checking system operation.
Rotate the Pitch Bend wheel while holding the Setup
button to turn the Audition function on. The connected
tone generator will then produce sound whenever the Pitch
Bend wheel is rotated.
Press the Setup button again to turn the Audition func-
tion off.