MOTIF-RACK XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”)
MOTIF-RACK XS Editor Owner’s Manual 30

Micro Tuning

Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed
Parameter section. On the MOTIF-RACK XS instrument, these parameters are the same as those called
up by selecting “Micro Tune” on the Utility Select window.
Multi Common

This Parameter category, called up by selecting the “M” row in the Mixer section, consists of the following

sub categories.

Effect

Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed
Parameter section. On the MOTIF-RACK XS instrument, these parameters are the same as those called
up by selecting “Effect” on the MULTI COMMON Edit Select window then selecting “Reverb” and
“Chorus.”

Master FX/EQ (Master Effect/EQ)

Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and
EQ in the Detailed Parameter section. On the MOTIF-RACK XS instrument, the Master Effect parameters
are the same as those called up by selecting “Effect” on the MULTI COMMON Edit Select window then
selecting “Master,” while the Master EQ parameters are the same as those called up by selecting “MEQ”
on the MULTI COMMON Edit Select window.

Multi Name

Clicking this in the Parameter Category section calls up the box which lets you edit the Multi name in the
Detailed Parameter section. On the MOTIF-RACK XS instrument, this is the same as the window called
up by selecting “Name” on the MULTI COMMON Edit Select window.
Part Common

This Parameter category which is called up by selecting any of the “1” – “16” rows in the Mixer section

consists of the following sub categories.

General

Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit
the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch,
Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part
parameters (the “M” indicator appears at the top right during editing) and Voice Common parameters
(the “V” indicator appears at the top right during editing) can be edited. To distinguish between them, a
small dot is shown at the immediate left of the parameters.
ARP (Arpeggio)
Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio
assigned to the current Part in the Detailed Parameter section. On the MOTIF-RACK XS instrument,
these parameters are the same as those called up by selecting “Arpeggio” on the MULTI COMMON Edit
Select window or MULTI Edit Select window.
Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which
lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 14).

RCV/Control Set (Receive/Control Set)

Clicking this calls up the RCV/CONTROLLER SET ASSIGN window in the Parameter Category section.
This window lets you edit the Receive Switch parameters for the current Part and the Controller Set
Assign parameters for the current Part and the Voice. On the MOTIF-RACK XS instrument, these
parameters are the same as those called up by selecting “RcvSw” on the MULTI Edit Select window.

LFO (Low Frequency Oscillator)

Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice
assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available
if the Drum Voice is assigned to the current Part.