MOTIF-RACK XS Editor Window: Bottom section
MOTIF-RACK XS Editor Owner’s Manual 32
Bottom section

1Controller Set status

This section indicates which controller of the MOTIF-RACK XS (either built-in or connected) is used as
the Control Source of the Controller Set edited in the RCV/CONTROLLER SET ASSIGN window.

1Part

Indicates the current Part. When [Voice]/[Multi] is set to “Voice” (Voice mode is enabled), in the Voice
mode, this indication is fixed to “1.” When the [Voice]/[Multi] is set to “Multi” (Multi mode is enabled), in the
Multi mode, this indication is determined by selecting the Part in the Mixer section.

2Control Source

Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as
follows:

3On/Off status

When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source
(controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source
(controller).
Indication Control Source Indication Control Source
PB Pitch Bend Wheel BC Breath Controller
MW Modulation Wheel AS1 ASSIGN 1 knob
AT After Touch (keyboard) AS2 ASSIGN 2 knob
FC Foot Controller FC2 Foot Controller 2
FS Foot Switch AF1 ASSIGNABLE FUNCTION 1 button
RB Ribbon Controller AF2 ASSIGNABLE FUNCTION 2 button
1
2
8
)
3
9
6745
1
3
2