r

 

 

 

e e

 

f

 

n

e

 

 

 

c

R

 

 

 

e

 

 

 

 

The Functions

The “Functions” provide access to a range of detailed instrument parameters for tun- ing, setting the split point, and adjusting the voices and effects. Take a look at the function list starting on the opposite page. There are 47 function parameters in all.

When you locate a function you want to set up, simply select the function’s display name (shown to the right of the function name in the list) and adjust as required.

Selecting and Setting Functions

1 Find the function you want to set in the list that begins on page 76.

2 Press the [FUNCTION] button.

StyleVol

100

3 Select a function.

Press the CATEGORY [f ] and [r ] buttons as many times as necessary until the function’s display name appears in the display.

Transpos

00

The selected function.

4 Use the dial, the [+] and [-] buttons, or the [0]–[9] number buttons to set the selected function as required.

The [+] and [-] buttons are used to make ON/ OFF type settings: [+] = ON, [-] = OFF.

In some cases the [+] button will initiate execution of the selected function, and the [-] will cancel the selection.

Direct numeric entry.

• Decrement value by 1.

• Increment value by 1.

• OFF

• ON

• Cancel

• Execute

 

Press simultaneously to recall

 

the default setting.

Function settings are stored in memory as soon as they are changed. To restore all initial factor default settings perform the “Backup Clear” procedure described in the “Initialization” section on page 49.

DGX-220/YPG-225 Owner’s Manual 75