Yamaha YPP-100 Setting Up

10

YPP-100

Setting Up

Stereo System

•Before connecting the YPP-100 to other electronic components, turn off the power for all compo-

nents. Before turning the power on or off for all components, set all-volume levels to minimum.

CAUTION

Power supply connections

Using An AC Power Adaptor..............................................................

The OUTPUT R and L/L+R jacks deliver the output of the YPP-100

for connection to an instrument amplifier, mixing console, PA system,

or recording equipment. If you will be connecting the YPP-100 to a

monaural sound system, use only the L/L+R jack. When a plug is

inserted into the L/L+R jack only, the left- and right-channel signals are

combined and delivered via the L/L+R jack so you don’t lose any of the

YPP-100’s sound.

CAUTION

•When the YPP-100’s OUTPUT jacks are connected to an external sound system,

first turn the YPP-100 power on, and then the power to the external amplifier/

speaker system. Reverse this order when turning the power off.

ZMake sure that the STANDBY/ON switch of the YPP-100 is set to

STANDBY.

XConnect the AC adaptor (PA-5D, PA-5C or other adaptor specifi-

cally recommended by Yamaha) to the power supply jack.

CPlug the AC adaptor into an AC outlet.

CAUTION

•Never interrupt the power supply (e.g. unplug the AC adaptor) during any

YPP-100 record operation! Doing so can result in a loss of data.

WARNING

•Use ONLY a Yamaha PA-5D or PA-5C AC Power Adaptor (or other adaptor

specifically recommended by Yamaha) to power your instrument from the AC

mains. The use of other adaptors may result in irreparable damage to both

the adaptor and the YPP-100.

•Unplug the AC Power Adaptor when not using the YPP-100, or during

electrical storms.

•Plugging or unplugging the AC power adaptor will reset the YPP-100 to the

defaults.

Accessory Jacks

Using the OUTPUT R and L/L+R Jacks ..................................

PA-5D

Contents

Main WARNING: SPECIFICATIONS SUBJECT TO CHANGE: NOTICE: ENVIRONMENTAL ISSUES: SPECIAL MESSAGE SECTION PLEASE KEEP THIS MANUAL FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! 2. IMPORTANT: When connecting this product to accessories and/ 3. NOTE: OBSERVERA! PRECAUTIONS Power supply/AC power adaptor Location Do not open PLEASE READ CAREFULLY BEFORE PROCEEDING CAUTION 2/2 Saving data Backing up the oppy disk Saving and backing up your data Connections Maintenance Handling caution Introduction Included Accessories Contents The Control Panel Setting Up Selecting & Playing Voices Playing the Demonstration Tunes The Dual Mode Reverb The Control Panel The Control Panel Setting Up Power supply connections Using the OUTPUT R and L/L+R Jacks Using An AC Power Adaptor Z Setting Up Music Rest Using the MIDI IN and OUT Connectors Using the PHONES Jacks Using the Damper Pedal (connect a footswitch to the DAMPER Jack) Selecting & Playing Voices Turn Power On Playing the Demonstration Tunes Engage the Demo Mode Play a Voice Demo Voice Demo Exit From the Demo Mode Playing the Demonstration Tunes Engage the Preset Song Mode Play a Preset Song Preset Song Exit From the Preset Song Mode Preset Song A-B Repeat Playing the Demonstration Tunes Specify the Beginning (A) of the Phrase Specify the End (B) of the Phrase Stop Playback Preset Song Part Cancel Playing the Demonstration Tunes Turn the Desired Part Off Start/Stop Playback Synchro Start The Dual Mode Other Dual Mode Functions Reverb Adjusting Reverb Depth The Effect Adjusting Effect Depth Touch Sensitivity HARD MEDIUM SOFT FIXED Transposition The Metronome & Tempo Control The Metronome Metronome Time Signature Metronome Volume Function Tempo Control Using the User Song Recorder The user song recorder actually records the following data: Recording Make All Necessary Initial Settings Engage the Record Ready Mode Using the User Song Recorder Start Recording Stop Recording Erasing a Single Trac k Changing the Initial Settings Playback Using the User Song Recorder Synchro Start Soft Pedal Start/Stop The Function Mode To Select a Function Z X C F1 The Function Mode F2 F2.1: Scale F2.2: Base Note F3 F3.1: Dual Balance F3.2: Dual Detune F3.3: 1st V oice Octave Shift F3.4: 2nd V oice Octave Shift F3.5: 1st V oice Effect Depth F3.6: 2nd V oice Effect Depth F4 F5 F6 F7 F7.1: MIDI T ransmit Channel Selection F7.2: MIDI Receive Channel Selection F7.3: Local Control ON/OFF F7.4: Program Change ON/OFF F7.5: Control Change ON/OFF F7.6: MIDI T ransmit Transpose F7.7: Panel/Status T ransmit F7.8: Bulk Data Dump F8 F8.2: MIDI F8.3: Tuning F8.4: Pedal F8.1: Voice Using the MIDI Functions What Is MIDI? Using the MIDI Functions Connecting to a Personal Computer Using the MIDI Functions Factory Preset Recall Options FC5, FC4 Footswitch Connects to the DAMPER or SOFT Jacks. Troubleshooting Voice Descriptions Voice Demo Tune Titles Demo and Preset Song List Preset Song Titles Function Factory Setting List MIDI Data Format 3 MODE MESSAGES Data format: [BnH] -> [cc] -> [vv] Data format: [8nH] -> [kk] -> [vv] 2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv] 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] 5. SYSTEM REALTIME MESSAGES 6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> 7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> 8. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H] (2) XG Native Bulk Data (reception only) Effect MIDI Map REVERB EFFECT <Table 1> MIDI Parameter Change table ( SYSTEM ) Page 1 Assembly Parts Keyboard Stand Assembly X C V B Post-assembly checklist Specifications Limited Warranty 90 DAYS LABOR 1 YEAR PARTS YPP SERIES OF LIGHT PIANO CONSUMERS RESPONSIBILITIES EXCLUSIONS NORTH AMERICA CENTRAL & SOUTH AMERICA OCEANIA EUROPE AFRICA MIDDLE EAST ASIA