Yamaha YPP-100 Connecting to a Personal Computer

36

YPP-100

Connecting to a Personal Computer

By connecting your YPP-100’s MIDI terminals to a personal computer, you can have

access to a wide variety of music software.

When using a MIDI interface device installed in the personal computer, connect the MIDI

terminals of the personal computer and the YPP-100.

Use only special MIDI cables when connecting MIDI devices.

●When using a MIDI interface with a Macintosh series computer, connect the

RS-422 terminal of the computer (modem or printer terminal) to the MIDI

interface, as shown in the diagram below.

MIDI INMIDI OUT

MIDI OUTMIDI IN

YPP-100

●Connect the MIDI terminals of the YPP-100 to the MIDI terminals of the per-

sonal computer.

●When connecting to a computer with a USB interface, use the Yamaha UX16

USB/MIDI Interface. Connect the UX16 and the computer with a standard

USB cable, then make the proper MIDI connections between the YPP-100 and

the UX16.

MIDI IN

RS-422

MIDI OUT

MIDI Interface

YPP-100

YPP-100

IN

OUT

MIDI IN

USB

MIDI OUT

UX16

•When connecting the YPP-100 to a personal computer, first turn the power to both the YPP-100 and

the computer OFF before connecting the cable. After connecting the cable, turn the power to the

computer on first, then turn on the YPP-100.

•When using a Macintosh series computer, set the MIDI interface clock setting in the application

software to match the setting of the MIDI interface you are using. For details, refer to the owner’s

manual for the software you are using.

Computer

(sequencer software)

Computer

(sequencer software)

Computer

(sequencer software)

Using the MIDI Functions

Contents

Main WARNING: SPECIFICATIONS SUBJECT TO CHANGE: NOTICE: ENVIRONMENTAL ISSUES: SPECIAL MESSAGE SECTION PLEASE KEEP THIS MANUAL FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! 2. IMPORTANT: When connecting this product to accessories and/ 3. NOTE: OBSERVERA! PRECAUTIONS Power supply/AC power adaptor Location Do not open PLEASE READ CAREFULLY BEFORE PROCEEDING CAUTION 2/2 Saving data Backing up the oppy disk Saving and backing up your data Connections Maintenance Handling caution Introduction Included Accessories Contents The Control Panel Setting Up Selecting & Playing Voices Playing the Demonstration Tunes The Dual Mode Reverb The Control Panel The Control Panel Setting Up Power supply connections Using the OUTPUT R and L/L+R Jacks Using An AC Power Adaptor Z Setting Up Music Rest Using the MIDI IN and OUT Connectors Using the PHONES Jacks Using the Damper Pedal (connect a footswitch to the DAMPER Jack) Selecting & Playing Voices Turn Power On Playing the Demonstration Tunes Engage the Demo Mode Play a Voice Demo Voice Demo Exit From the Demo Mode Playing the Demonstration Tunes Engage the Preset Song Mode Play a Preset Song Preset Song Exit From the Preset Song Mode Preset Song A-B Repeat Playing the Demonstration Tunes Specify the Beginning (A) of the Phrase Specify the End (B) of the Phrase Stop Playback Preset Song Part Cancel Playing the Demonstration Tunes Turn the Desired Part Off Start/Stop Playback Synchro Start The Dual Mode Other Dual Mode Functions Reverb Adjusting Reverb Depth The Effect Adjusting Effect Depth Touch Sensitivity HARD MEDIUM SOFT FIXED Transposition The Metronome & Tempo Control The Metronome Metronome Time Signature Metronome Volume Function Tempo Control Using the User Song Recorder The user song recorder actually records the following data: Recording Make All Necessary Initial Settings Engage the Record Ready Mode Using the User Song Recorder Start Recording Stop Recording Erasing a Single Trac k Changing the Initial Settings Playback Using the User Song Recorder Synchro Start Soft Pedal Start/Stop The Function Mode To Select a Function Z X C F1 The Function Mode F2 F2.1: Scale F2.2: Base Note F3 F3.1: Dual Balance F3.2: Dual Detune F3.3: 1st V oice Octave Shift F3.4: 2nd V oice Octave Shift F3.5: 1st V oice Effect Depth F3.6: 2nd V oice Effect Depth F4 F5 F6 F7 F7.1: MIDI T ransmit Channel Selection F7.2: MIDI Receive Channel Selection F7.3: Local Control ON/OFF F7.4: Program Change ON/OFF F7.5: Control Change ON/OFF F7.6: MIDI T ransmit Transpose F7.7: Panel/Status T ransmit F7.8: Bulk Data Dump F8 F8.2: MIDI F8.3: Tuning F8.4: Pedal F8.1: Voice Using the MIDI Functions What Is MIDI? Using the MIDI Functions Connecting to a Personal Computer Using the MIDI Functions Factory Preset Recall Options FC5, FC4 Footswitch Connects to the DAMPER or SOFT Jacks. Troubleshooting Voice Descriptions Voice Demo Tune Titles Demo and Preset Song List Preset Song Titles Function Factory Setting List MIDI Data Format 3 MODE MESSAGES Data format: [BnH] -> [cc] -> [vv] Data format: [8nH] -> [kk] -> [vv] 2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv] 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] 5. SYSTEM REALTIME MESSAGES 6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> 7. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> 8. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H] (2) XG Native Bulk Data (reception only) Effect MIDI Map REVERB EFFECT <Table 1> MIDI Parameter Change table ( SYSTEM ) Page 1 Assembly Parts Keyboard Stand Assembly X C V B Post-assembly checklist Specifications Limited Warranty 90 DAYS LABOR 1 YEAR PARTS YPP SERIES OF LIGHT PIANO CONSUMERS RESPONSIBILITIES EXCLUSIONS NORTH AMERICA CENTRAL & SOUTH AMERICA OCEANIA EUROPE AFRICA MIDDLE EAST ASIA