Song settings
52 PSR-E323/YPT-320 Owner’s Manual
Reference

Song Volume

This procedure allows you to adjust the balance
between Song playback and the notes you play
on the keyboard by setting the volume of the
playback sound.
1Press the [SONG] button.
2Press the [FUNCTION] button a number of
times until “SongVol” appears.
3Set the Song Volume by pressing the number
buttons [0]–[9], [+], [-].

Tap Start

Set the Tempo by using the number buttons [0]–
[9], [+], [-].
After selecting a song, you can set the Tempo by
simply tapping the [TEMPO/TAP] button at the
required tempo—four times for time signatures
in 4, and three times for time signatures in 3.
You can change the Tempo during Song play-
back by pressing the [TEMPO/TAP] button just
twice.

Changing the Melody Voice

You can change a Song’s melody Voice to any
other Voice you prefer.
1Select the Song and play it.
Refer to the section “Playing Songs” on page
16.
2Select a desired Voice by using the number
buttons [0]–[9], [+], [-].
The selected Voice sounds when you play
the keyboard.
If a Song has played through and stopped
during this procedure, press the [START/
STOP] button to start playback again.
3Press and hold the [VOICE] button for
longer than a second.
“SONG MELODY VOICE” appears in the
display for a few seconds, indicating that the
Voice selected in Step 2 has replaced the
Song’s original melody Voice.
Current Song Volume

SongVol

100
• Press the [+] and [-] buttons simultaneously to instantly reset
the value to its default setting (100).
NOTE
•You cannot change the melody Voice of a User Song.
NOTE

HnkyTonk

004
001
Hold for longer than
a second.