If your amplifier has two sets of speaker terminals

Right speaker

This unit

OUTPUT

INPUT2

AUTO

PHASE

TO SPEAKERS

 

POWER

 

 

 

 

 

 

ON OFF

NOM REV

FROM AMPLIFIER

 

 

 

INPUT1

 

 

 

Left speaker

To AC outlet

Amplifier

A B

(Both “A” and “B” outputs must be ON.)

Connecting to this unit’s OUTPUT/INPUT terminals

For connections, cut the speaker wires as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If these wires are reversed, the sound will be unnatural and will lack bass.

Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit, your amplifier and/or speakers.

*Banana Plug connections are also possible (except for U.K. and Europe models). Simply insert the Banana Plug connector into the corresponding terminal.

How to Connect:

Red: positive (+)

Black: negative (–)

2

1

3

➀Unscrew the knob.

➁Insert the bare wire. [Remove approx. 5mm (1/4”) insulation from

the speaker wires.]

➂Tighten the knob and secure the wire.

6