Yamaha YST-SW150/80 CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER, If using one unit, If using two units, Notes, PRE OUT, PRE OUT

CONNECTING TO LINE OUTPUT (PIN JACK) TERMINALS OF THE AMPLIFIER

•Leave the main speakers connected to the amplifier.

•Amplifier line output terminals are generally labeled PRE OUT or SUBWOOFER OUT.

*For PRE OUT terminal connection, the amplifier must possess at least two sets of PRE OUT terminals. With some amplifiers with only one set of PRE OUT terminals, connection can result in no sound from the main left and right speakers. In this case, select the method of connecting to the speaker terminals.

•To connect with a YAMAHA DSP amplifier, connect the LOW PASS (or SUBWOOFER etc.) terminal on the rear of the DSP amplifier to either the left (L) or right (R) INPUT 2 terminal.

If using one unit

Left speaker This unit

OUTPUT	INPUT2	AUTO	PHASE
TO SPEAKERS		POWER
		ON OFF	NOM REV
FROM AMPLIFIER
INPUT1

Right speaker

To AC outlet	<YAMAHA DSP amplifier>	Pin plug cords
	LOW PASS
Amplifier	<Amplifier>

PRE OUT

If using two units

Left speaker Right speaker

OUTPUT	INPUT2	AUTO	PHASE	OUTPUT	INPUT2	AUTO	PHASE
TO SPEAKERS		POWER		TO SPEAKERS		POWER
		ON OFF	NOM REV			ON OFF	NOM REV
FROM AMPLIFIER				FROM AMPLIFIER
INPUT1				INPUT1

Pin plug cords

This unit This unit

PRE OUT

Amplifier

To AC outlet To AC outlet

Notes

•When connected to line output terminals of the amplifier, other speakers should not be connected to the OUTPUT terminals on the rear panel of this unit. If connected, they will not produce sound.

•When connecting to a monaural line output terminal of the amplifier, connect to either the left or right INPUT 2 terminal.

7