CONTROLS AND THEIR FUNCTIONS

8OUTPUT (TO SPEAKERS) terminals

Can be used for connecting to the main speakers. Signals from the INPUT1 terminals are sent to these terminals.

(Refer to “CONNECTIONS” for details.)

9INPUT1 (FROM AMPLIFIER) terminals Used to connect the subwoofer with the speaker terminals of the amplifier.

(Refer to “CONNECTIONS” for details.

0INPUT2 terminals

Used to input line level signals from the amplifier. (Refer to “CONNECTIONS” for details.)

AAUTO STANDBY (HIGH/LOW/OFF) switch This switch is originally set to the OFF position. By setting this switch to the HIGH or LOW position, the subwoofer’s automatic power-switching function operates as described on page 11. If you do not need this function, leave this switch in the OFF position.

*Make sure to change the setting of this switch only when the subwoofer is set in the standby mode by pressing the STANDBY/ON button.

BPHASE switch

Normally this switch is to be set to the REV (reverse) position. However, according to your speaker systems or the listening condition, there may be a case when better sound quality is obtained by setting this switch to the NORM (normal) position. Select the better position by monitoring the sound.

10