•VOLTAGE SELECTOR

(China, Korea, Asia and General models only)

The voltage selector switch on the rear panel of this unit must be set for your local main voltage BEFORE plugging this unit into the AC main supply. Voltages are 110/120/220/230-240 V AC, 50/60 Hz.

Standby mode

When this unit is set in standby mode by pressing the STANDBY/ON button on the control panel, this unit consumes a small amount of power. This state is called the standby mode. This unit’s power supply is completely cut off from the AC line only when the POWER switch on the rear panel is set in the OFF position or the AC power cord is disconnected.

This unit features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move this unit away from the TV set.

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.

Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

CONTENTS

 

FEATURES ....................................................................

2

SUPPLIED ACCESSORIES ...........................................

2

PLACEMENT ................................................................

3

CONNECTIONS ...........................................................

4

1Connecting to line output (pin jack) terminals

of the amplifier ....................................................

4

2Connecting to speaker output terminals of

the amplifier ..........................................................

6

Connecting to the INPUT1/ OUTPUT terminals

of the subwoofer .........................................................

8

Plug in the subwoofer to the AC outlet ......................

8

CONTROLS AND THEIR FUNCTIONS ....................

9

AUTOMATIC POWER-SWITCHING

 

FUNCTION .................................................................

11

Changing the AUTO STANDBY setting .................

11

ADJUSTING THE SUBWOOFER

 

BEFORE USE .............................................................

12

Frequency characteristics .........................................

13

ADVANCED YAMAHA ACTIVE SERVO

 

TECHNOLOGY II .......................................................

14

TROUBLESHOOTING ...............................................

15

SPECIFICATIONS ..........................................

Backcover

1