Operation
MP3 OPERATION
• Playing an MP3 Disc
Insert your MP3 and all tracks will be played consecutively or you can move forward to the next track, or backwards, repeat, shuffle, or scan each track on the disc with the keys provided.
• Searching Tracks on an MP3 Disc
Three search methods are available to find the track required on a digital MP3 disc. As a large number of tracks can be stored on a single MP3 Disc, the search can be complicated to perform if the tracks are not numbered and stored in a logical directory structure and order on the disc.
WARNING. To avoid distraction you must not attempt to perform searches while driving a vehicle.
The search mode is initiated by pressing the "APS" Key either once, twice , or three times, to enter one of the search methods described below. Use the following table to find key assignment. Alternatively use volume up / down during text search to select desired text letters.
For example
•While in text search mode, to enter the text letter "R" press the M6 button three times.
•While in numerical search mode, to enter the number 37 press "M3" followed by "mode".
Key Assigned in Searching Mode (Table 1)
APS | Mode Select |
BAND | ENTER |
M1 | A, B, C, 1 |
M2 | D, E, F, 2 |
M3 | G, H, I, 3 |
M4 | J, K, L, 4 |
M5 | M, N, O, 5 |
| 10 TRACK DOWN |
M6 | P, Q, R, 6 |
| 10 TRACK UP |
MODE | S, T, U, 7 |
TUNE | Y, Z, SPACE, 9 |
TUNEæ¦ | V, W, X, 8 |
SEL | CHARACTER |
| SHIFT RIGHT |
DISP | _, |
VOL + VOL- | CHARACTER SELECT |
| (A, B 8, 9, 0) |
|
|
Insert the MP3 disc and wait for it to load before
beginning a search.
•Method 1 - By Numerical Track Number
•Press "APS" (#18) Once
•Then from the key assignment list (Table 1) enter the 1, 2 or 3 digit track number consecutively
•Press "BAND" (#13) or wait a few seconds and the selected track will play.
•Method 2 - By Alphabetical Directory or Track Name
•Press "APS" (#18) Twice
•Then enter one or more letters of the name using the key assignment list (Table 1). After each letter is entered press the "SEL" (#10) key to move to the next letter.
•Press "BAND" (#13) once all desired letters have been entered.
•Every directory, artist name or track on the disc that contains the letter or letters entered in your search will
be displayed in a list that can be scrolled or moved through using the " 
“ (#16) or " 
“ keys (#17) , and
the "BAND" Key (#13) to accept the displayed entry to begin playing immediately, or move to the next level if the result of the search was another Directory.
•If the “ `` “ Symbol is shown you have arrived at the next directory so again scroll using the " 
“ (#16) or
“ 
“ (#17) keys, and the "BAND" (#13) Key to Accept the track or again move to the next level if the result is a directory.
Note: The more letter used, the more exact the result listed. For example, searching on ‘E’ in the song ‘Eleven o’clock’ will bring up every name with an ‘E’ in the title, so try to use more unique letters where possible to limit results, say using ‘VE’ instead of ‘E’.
• Method 3 - By Alphabetical Directory Structure
(The directory structure is how the tracks are grouped in folders or directories on the disc. The directory "name" is the name that was given when the disc was recorded. It may be any text string. )
•Press "APS" (#18) Three times.
•Scroll the result by using the " 
“ (#16) or "
" (#17) keys, and the "BAND" Key (#13) to Accept the track or to move to the next level if the result is a directory.
•At any time the directory indicator “ `` “ is displayed use the " 
" (#16) or "
“ (#17) keys to scroll or the
"BAND" (#13) Key to move back up one directory.
Note: Searching by folder (or directory) can be used to quickly get to the desired group of songs.
• ID3 Tag (Optional Feature)
Press the “DISP” Key (#15) to display the ID3 Tag
information.
Removing the unit
1.Preparations
Before you remove the frame, operate the OPEN key (#7) to take out the operating unit.
2+3. Distance frame
Next, pull out the distance frame.
4.Using the removal key
After you have removed the frame of the radio, lower the operating unit again.
Now apply the key at the sides of the radio as shown in the figure and pull it out.
Installation
DIN-REAR MOUNTING (METHOD B)
Use the screw holes on the side of the unit during installation.
Mount the unit on the holes prefabricated by the manufacturer.
1.Preparations
Choose a position where the screw holes of the angle support line up with the holes on the unit. Fasten the screws on two holes on each side.
2.The screw holes
3.Fastening tracks of the unit manufacturer
4.Dashboard or console
NOTE: The mounting frame, cover frame and punched
plate are not required for Method B.
