Engine

•Follow engine manual for lubrication instructions.

Lubricate

Lubricate

Lubricate

Figure 10

NOTE: When tipping the unit, empty fuel tank and keep engine spark plug side up.

Cutting Blade

WARNING: When removing the cutting blade for sharpening or replacement, protect hands by using heavy gloves or a rag to grasp the cutting blade.

To remove blade:

•Remove the bolt and blade bell support which hold the blade and adapter to the engine crankshaft. See Figure 11. Remove the blade and the adapter from the crankshaft.

WARNING: Periodically inspect the blade adapter for cracks, especially if you strike a foreign object. Replace when necessary.

•When sharpening the blade, follow the original angle of grind as a guide. It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade. An unbalanced blade will cause excessive vibration when rotating at high speeds, may damage the mower and/or cause personal injury.

•The blade can be tested by balancing it on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly. It is recommended that the blade always be removed from the adapter for the best test of balance.

Blade

Adapter

Blade Bell Support

Hex Bolt

Figure 11

•Before reinstalling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil (or engine oil).Also lubricate the bolt holes and bolts.

To Reinstall Blade:

•Be sure to install the blade with the side of the blade marked “Bottom” (or with part number) facing the ground when the mower is in the operating position.

•Make sure the blade is aligned with and seated onto the blade adapter flanges.

•Place blade bell support on blade. Make sure the notches on the blade bell support are aligned with the small holes in the blade. See Figure 11.

•Replace hex bolt. Tighten to recommended torque. Blade Torque: 450 in. lbs. min., 600 in. lbs. max.

•To ensure safe operation of mower, check all nuts and bolts periodically for correct torque.

Cutting Deck

•The underside of the mower deck should be cleaned after each use to prevent a build-up of grass clippings, leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite rust and corrosion, and may prevent proper mulching.

•The deck may be cleaned by tilting the mower and scraping clean with a suitable tool (make certain the spark plug wire is disconnected).

NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. They may cause damage to electric components, spindles, pulleys, bearings or the engine. The use of water will shorten life and reduce serviceability.

Engine

•Refer to the engine manual for all engine maintenance instructions.

•Maintain engine oil as instructed in the engine manual.

•Service air cleaner every 25 hours of operation under normal conditions. Clean every few hours under extremely dusty conditions. Poor engine

11

Page 10 Page 12
Page 11
Image 11
Yard-Man 573 manual Cutting Blade, Cutting Deck, Engine
Page 10 Page 12

573 specifications

The Yard-Man 573 lawnmower is a remarkable piece of outdoor equipment that offers both power and efficiency for homeowners seeking a dependable tool for maintaining their lawns. With its robust design and thoughtful engineering, the Yard-Man 573 stands out in the crowded market of residential lawn maintenance.

One of the key features of the Yard-Man 573 is its reliable engine. Equipped with a durable gas engine, it delivers ample horsepower to handle various grass types and challenging terrains. This engine ensures consistent performance, even under demanding conditions, allowing users to tackle their mowing tasks with confidence.

The Yard-Man 573 boasts a wide cutting deck, typically around 21 inches, which enhances its ability to cover more ground in less time. This size not only speeds up the mowing process but also provides a clean and even cut. The cutting height can be easily adjusted to cater to different grass lengths and seasonal changes, giving users the flexibility to maintain their lawn as per their preference.

User comfort and convenience are also prioritized in the design of the Yard-Man 573. It features an ergonomic handle that is adjustable, allowing users of different heights to operate the mower comfortably. The foldable handle mechanism makes storage a breeze, saving space in the garage or shed.

Another technological advancement integrated into the Yard-Man 573 is its efficient grass collection system. The mower is equipped with a rear bagger, which effectively collects clippings, minimizing the cleanup effort after mowing. This feature not only helps keep the lawn tidy but also allows for easy disposal of clippings, whether for composting or waste collection.

Safety is a critical aspect of lawnmowers, and the Yard-Man 573 does not disappoint. It is designed with safety features such as a blade brake that stops the blades when the user releases the handle, preventing accidents. Additionally, the mower's sturdy build and reliable materials contribute to longevity and resilience.

In summary, the Yard-Man 573 combines power, efficiency, and user-friendly features to create a lawnmower that meets the demands of both seasoned landscapers and first-time homeowners alike. With its advanced engineering and thoughtful design, it is poised to provide a reliable solution for maintaining a beautiful lawn year after year.
Top Page Image Contents