Model 573
Ref. No. | Part No. | Description | Ref. No. | Part No. | Description |
|
|
|
|
|
|
1. | Control Handle |
| Handle Bracket Assembly LH | ||
2. | Oval | 29. | Bell Washer | ||
3. | Hex Lock Nut | 30. | Torsion Spring | ||
4. | Control Housing | 31. | 14578 | Height Adjust. Assembly RH | |
5. | Rear Axle |
| 14579 | Height Adjust. Assembly LH* | |
6. | Upper Handle | 32. | Mounting Bracket | ||
7. | Rope Guide | 33. | Bell Washer | ||
8. | Carriage Bolt | 34. | Hex Washer Hd. TT Screw | ||
9. | Lower Handle | 35. | TT Sems Screw | ||
10. | Wing Nut | 36. | Chute Deflector | ||
11. | Hand Knob | 37. | Mulching Plug Assembly | ||
12. | Hairpin Clip | 38. | Hex Lock Nut | ||
13. | Control Cable 55” | 39. | 15261A | Height Adjustment Plate | |
14. | Spacer | 41. | Blade Adapter | ||
15. | Cable Tie |
| Blade Adapter Kit (for service) | ||
16. | 17098 | Hinge Clip | 42. | 20” Mulching Blade | |
17. | Trail Shield | 43. | Blade Bell Support | ||
18. | Cutting Deck Assembly: 20” | 44. | Hex Bolt | ||
19. | Bell Washer | 45. | Hinge Pin | ||
20. | Knob: Height Adjustment | 46. | Saddle Washer | ||
21. | Lever: Spring | 47. | Lock Nut | ||
22. | 48. | Hex Nut | |||
23. | Wave Washer | 49. | Lock Nut | ||
24. | Axle Bolt: Front | 50. | Rear Wheel 14 x 2.125” | ||
25. | Hubcap: Radial Spoke, Yellow | 51. | Flat Washer | ||
26. | Shoulder Bolt | 52. | Engine Shroud | ||
27. | 15262B | Pivot Bar | 53. | Hex Bolt | |
28.
NOTE: For painted parts, please refer to the list of color codes below. Please add the applicable color code, wherever needed, to the part number to order a replacement part. For instance, if a part numbered
Powder Black: 0637
15
